DB-PLCC44-SKT FDI, DB-PLCC44-SKT Datasheet - Page 2

• Manufacturer Part Number: DB-PLCC44-SKT
• Description: Interface Modules & Development Tools DB-PLCC44-SKT Rev 2 44pZIF PLCC skt load
• Manufacturer: FDI

Specifications of DB-PLCC44-SKT

• Interface Type: I2C, SPI, UART
• Operating Supply Voltage: 3.3 V to 5 V
• Product: Interface Modules
• For Use With/related Products: P89C51, P89V51, P89LV51
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Device Selection Jumpers –The
select between supported microcontrollers for programming. Consult the
correct jumper settings for your target device.
Headers – The
footprint for easy probing of signals or to support prototyping or wire-wrapping. Consult the
schematic if there are any questions about pin alignment from the microcontroller to the headers.
Power – The USB-Dongle provides the regulated 5.0V and 3.3V power required by the DB-PLCC44-SKT.
LED - A green activity or status LED is provided at location D1 on the Derivative Board. This LED can be used to
indicate when the microcontroller is being programmed or for other types of user activity under software control.
Crystal or Clock Frequency - The
located at position Y1 on the DB.
Rev 2 8/14/2008
Technical Details
edge finger connector to interface to
Ordering Information
Board Dimensions 2.505” x 1.560”
The
DB-PLCC44-SKT
the USB-Dongle.
DB-PLCC44-SKT
Availability: Stock
www.mouser.com
All brand names and product names are trademarks or registered trademarks of their respective holders.
Order Online at:
uses a PCB
Example of USB-Dongle and Derivative Board
USB-Dongle
DB-PLCC44-SKT
brings every pin of the microcontroller out to a standard 0.10” spacing header
DB-PLCC44-SKT
The USB-Dongle includes a 14 pin connector to the Derivative Board
Switched Power (3V for ICP) or
Reset (High True for 8051 ISP)
that utilizes the following signals. Not all signals are used on all
PCL/SCL (ICP/I2C)
has 3 jumper blocks JP1, JP2 and JP3 to allow the user to easily
TXD (UART)
SCLK (SPI)
MSIO (SPI)
is clocked by an external 11.0592 MHz crystal oscillator
ISP/ICPn
Ground
DB-HVSON10-LPC9103
Target Interface
Derivative Boards:
E-mail:
DB-PLCC44-SKT
[phone] Phone
[phone] FAX
FDI Contact Info:
www.teamfdi.com
[e-mail]
5V (USB power, unswitched)
(for ICP & LPC2000 ARM)
PSEN/P0.14 (ISP entry)
PDA/SDA (ICP/I2C)
Reset (Low True)
3V (unswitched)
RXD (UART)
DB-PLCC44-SKT
MOSI (SPI)
schematic for the