EVAL232R FTDI, EVAL232R Datasheet - Page 14

• Manufacturer Part Number: EVAL232R
• Description: Interface Modules & Development Tools USB to RS232 Dev Module for FT232R IC
• Manufacturer: FTDI

Specifications of EVAL232R

• Interface Type: USB, RS-232
• Data Bus Width: Serial
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• Silicon Manufacturer: FTDI
• Silicon Core Number: FT232RL
• Kit Application Type: Interface
• Application Sub Type: USB To RS232
• Kit Contents: Board
• Rohs Compliant: Yes
• For Use With/related Products: FT232R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 626-DLP-EVAL232R

v) For 3.3V power controlled circuits the VCCIO pin must not be powered down with the external circuitry (the
The FT232RL’s CBUS0 and CBUS1 pins on the EVAL232R are configured to drive LED’s.
CBUS0 is used to indicate reception of data (RXLED#) and CBUS1 is used to indicate transmission of data (TXLED#).
When data is being transmitted or received the respective CBUS pin will drive from tri-state to low in order to provide
indication on the LEDs of data transfer. A digital one-shot time is used so that even a small percentage of data transfer
is visible to the end user.
The FT232R CBUS pins have 3 configurable options for driving an LED - these are TXLED#, RXLED#, and
TX&RXLED#.
EVAL232R FT232RL USB to RS232 Evaluation Module Datasheet Version 0.90
EEPROM. A high-power bus powered device must use this descriptor in the internal EEPROM to inform the
system of its power requirements.
PWREN# signal gets its VCC supply from VCCIO). Either connect the power switch between the output of the
3.3V regulator and the external 3.3V logic or power VCCIO from the 3V3OUT pin of the FT232R.
6.4 LED Interface
© Future Technology Devices International Ltd. 2005