DB-LQFP48-LPC2106 FDI, DB-LQFP48-LPC2106 Datasheet - Page 2

• Manufacturer Part Number: DB-LQFP48-LPC2106
• Description: Interface Modules & Development Tools DB-LQFP48-LPC2106 w/ LPC2106 load Rev 2.1
• Manufacturer: FDI

Specifications of DB-LQFP48-LPC2106

• Interface Type: I2C, SPI, UART
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: LPC2106
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Headers – The
header footprint for easy probing of signals or to support prototyping or wire-wrapping. Consult the
LPC2106
Power – The USB-Dongle provides the regulated 3.3V power required by the
onboard LDO, U3, provides the regulated 1.8V. The DB has a power measurement jumper, JP1, to allow the user to
easily measure the power consumption of the microcontroller. In the artwork, JP1 pin 1 is shorted to pin 2 so the
board is continuously powered. The board can be easily modified by cutting JP1 and loading a standard 0.10” header.
LED - A green activity or status LED is provided at location D1 on the Derivative Board. This LED can be used to
indicate when the microcontroller is being programmed or for other types of user activity under software control.
Crystal or Clock Frequency - The
located at position Y1 on the DB.
Rev 2 8/14/2008
Technical Details
Ordering Information
The
Board Dimensions 2.268” x 1.5”
PCB edge finger connector to
interface to the USB-Dongle.
DB-LQFP48-LPC2106
schematic if there are any questions about pin alignment from the microcontroller to the headers.
DB-LQFP48-LPC2106
Availability: Stock
www.mouser.com
All brand names and product names are trademarks or registered trademarks of their respective holders.
Order Online at:
Example of USB-Dongle and Derivative Board
USB-Dongle
uses a
DB-LQFP48-LPC2106
brings every pin of the microcontroller out to a standard 0.10” spacing
The USB-Dongle includes a 14 pin connector to the Derivative Board
Switched Power (3V for ICP) or
Reset (High True for 8051 ISP)
that utilizes the following signals. Not all signals are used on all
PCL/SCL (ICP/I2C)
TXD (UART)
SCLK (SPI)
MSIO (SPI)
ISP/ICPn
Ground
is clocked by an external 12.000 MHz crystal oscillator
DB-HVSON10-LPC9103
Target Interface
Derivative Boards:
E-mail:
[phone] Phone
[phone] FAX
FDI Contact Info:
DB-LQFP48-LPC2106
www.teamfdi.com
[e-mail]
5V (USB power, unswitched)
(for ICP & LPC2000 ARM)
PSEN/P0.14 (ISP entry)
PDA/SDA (ICP/I2C)
Reset (Low True)
3V (unswitched)
RXD (UART)
MOSI (SPI)
DB-LQFP48-
and an