DB-HVSON10-LPC9103 FDI, DB-HVSON10-LPC9103 Datasheet - Page 2

• Manufacturer Part Number: DB-HVSON10-LPC9103
• Description: Interface Modules & Development Tools DBHVSON10LPC9103 w/ LPC9103 loaded Rev 1
• Manufacturer: FDI

Specifications of DB-HVSON10-LPC9103

• Interface Type: I2C, SPI, UART
• Operating Supply Voltage: 5 V
• Product: Interface Modules
• For Use With/related Products: P89LPC903
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Headers – The
header footprint for easy probing of signals or to support prototyping or wire-wrapping. Consult the
LPC9103
Power – The USB-Dongle provides the regulated 3.3V power required by the DB-HVSON10-LPC9103. The DB
has a power measurement jumper, JP1, to allow the user to easily measure the power consumption of the
microcontroller. In the artwork, JP1 pin 1 is shorted to pin 2 so the board is continuously powered. The board can be
easily modified by cutting JP1 and loading a standard 0.10” header.
LED - A green activity or status LED is provided at location D1 on the Derivative Board. This LED can be used to
indicate when the microcontroller is being programmed or for other types of user activity under software control.
Crystal or Clock Frequency - The
at a frequency of 7.373 MHz so no external crystal is needed on the DB.
Rev 2 8/14/2008
The
Technical Details
Ordering Information
PCB edge finger connector to
Board Dimensions 1.218” x 0.7”
interface to the USB-Dongle.
DB-HVSON10-LPC9103
schematic if there are any questions about pin alignment from the microcontroller to the headers.
DB-HVSON10-LPC9103
Availability: Stock
www.mouser.com
All brand names and product names are trademarks or registered trademarks of their respective holders.
Order Online at:
Example of USB-Dongle and Derivative Board
uses a
USB-Dongle
DB-HVSON10-LPC9103
brings every pin of the microcontroller out to a standard 0.10” spacing
The USB-Dongle includes a 14 pin connector to the Derivative Board
Switched Power (3V for ICP) or
Reset (High True for 8051 ISP)
that utilizes the following signals. Not all signals are used on all
PCL/SCL (ICP/I2C)
TXD (UART)
SCLK (SPI)
MSIO (SPI)
ISP/ICPn
Ground
is clocked by the on-board oscillator in the LPC9103
DB-HVSON10-LPC9103
Target Interface
Derivative Boards:
E-mail:
[phone] Phone
[phone] FAX
FDI Contact Info:
www.teamfdi.com
[e-mail]
5V (USB power, unswitched)
(for ICP & LPC2000 ARM)
PSEN/P0.14 (ISP entry)
PDA/SDA (ICP/I2C)
Reset (Low True)
3V (unswitched)
RXD (UART)
MOSI (SPI)
DB-HVSON10-