General Description:
Nano SocketLAN
Ethernet module that enables installed
devices to connect to the IP Networks over
a 10/100BaseT Ethernet LAN. It includes
the iChip
Controller
Ethernet
connector, and is packaged in a 35x24
mm RoHS-compliant low profile form
factor.
Nano SocketLAN makes adding LAN
connectivity
breeze. It does not require any kind of IP
stack or driver development on the host
CPU and its multiple interfaces (UART,
SPI and USB) minimize the need to
redesign the host device hardware.
Connect One’s high-level AT+i™ API
eliminates the need to add LAN drivers,
security or networking protocols and tasks
to the host application.
Nano SocketLAN supports the SSL3/TLS1
protocol for secure sockets, HTTPS and
FTPS.
Nano
configuration parameters are stored in on-
board flash memory. The module is power-
efficient: the core operates at 1.2V, while
I/Os operate at 3.3V.
The Nano SocketLAN contains a pin to pin
compatible connector to Connect One’s
Nano Socket iWiFi Module, allowing a
seamless swap between the two modules.
Customers are now able to design
embedded devices to connect using either
LAN or WiFi, simply by adding the correct
module.
™
SocketLAN
™
PHY
CO2144 IP Communication
chip and a 10/100BaseT
to
™
embedded
with
is a secure embedded
on-board
firmware
Copyright © Connect One Ltd., Apr 2009. All rights reserved.
devices
RJ45
and
a
International:
Connect One Ltd.
20 Atir Yeda Street
Kfar Saba 44643, Israel
Phone: +972-9-766-0456
Fax: +972-9-766-0461
Email: sales@connectone.com
http://www.connectone.com
Nano SocketLAN
Miniature embedded secure
10/100BaseT Ethernet module
Typical applications:
Connecting serial embedded devices to
Adding SSL security to M2M solutions
For dual mode (LAN/WiFi) solutions –
Nano
operation modes:
As product volumes increases, customers
may realize significant cost savings by
switching to an on-PCB design using iChip
CO2144/2128/2064.
seamless as no changes are required to
the application. Reference designs and
additional information for this transition are
available on
The
provides
evaluating the Nano SocketLAN and can
also be used to evaluate the Nano Socket
iWiFi.
Preliminary Product Brief
10/100BaseT LAN
same footprint as Nano Socket iWiFi
SerialNET
allowing transparent bridging of Serial
over LAN, using the 3Mbps fast
UART. This is a true plug-and-play
mode that eliminates any changes to
the host application.
PPP modem emulation – allowing
existing
currently using PPP to connect
transparently over LAN
Full
allowing simple MCU to use the Nano
SocketLAN’s
application capabilities to perform
complex Internet operations such as
E-mail, FTP, SSL, embedded web
server and others. It also acts as a
firewall, providing a security gap
between the application and the
network.
II-EVB-363MS
SocketLAN
Internet
an
www.connectone.com
TM
(e.g.
easy
USA:
Connect One Semiconductors, Inc.
560 S. Winchester Blvd.
Suite 500
San Jose, CA 95128
Tel: (408) 572-5675
Fax: (408) 572-5601
Serial to LAN Bridge -
rich
Controller
The
supports
modem)
Publication Number 17-3550-01
evaluation
environment
protocol
transition
™
mode
designs
several
board
and
for
is
–