W42180-06-U2-CR Seoul Semiconductor Inc, W42180-06-U2-CR Datasheet - Page 25

• Manufacturer Part Number: W42180-06-U2-CR
• Description: LED High Power (> 0.5 Watts) Pure White 6300K 3.8W, 100-109lm
• Manufacturer: Seoul Semiconductor Inc

Specifications of W42180-06-U2-CR

• Illumination Color: Pure White
• Wavelength/color Temperature: 6300 K
• Luminous Flux: 108 lm
• Viewing Angle: 127 deg
• Power Rating: 3.28 W
• Operating Voltage: 3.3 V
• Operating Current: 800 mA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Package / Case: 7.4 mm x 5.08 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

180
150
260
240
220
200
* Caution
0
3. Reflow Soldering Conditions / Profile
4. Hand Soldering conditions
1. Reflow soldering should not be done more than one time.
2. Repairing should not be done after the LEDs have been soldered.
3. The bottom of the emiter is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
Lead : Not more than 3 seconds @MAX280 ℃
Slug : Use a thermal-adhesives
When repairing is unavoidable, suitable tools have to be used.
Pre-heating
Rising
5 °C/sec
25
Tm : Reflow machine setting temp (max 30 sec.)
Ts : Surface temp of PCB (max)
Ts : Surface temp of PCB (recommend)
Ts : Surface temp of PCB (min)
Document No. : SSC-QP-7-07-24 (Rev.00)
-5 °C/sec
Cooling
www.seoulsemicon.com
www.seoulsemicon.com
[Hr]
Time
January. 2011
January. 2011
Rev. 17
Rev. 17