PT-121-B-C11-EPA Luminus Devices, PT-121-B-C11-EPA Datasheet
PT-121-B-C11-EPA
Specifications of PT-121-B-C11-EPA
Related parts for PT-121-B-C11-EPA
PT-121-B-C11-EPA Summary of contents
Page 1
... Data front projectors and professional Rear-Projection Dis- plays with 4:3 aspect ratio • Optimized for Micro-Display diagonal sizes ranging from 0.7” to 0.96” with 4:3 aspect ratio. • Suitable for DLP™(0.7”XGA, 0.96SXGA), LCoS, HTPS and 3LCD ...
Page 2
... PT121 Summary Datasheet - Revision 04 - Preliminary Optical and Electrical Characteristics Emitting Area Emitting Area Dimensions Characteristics at recommended Pulsed Drive Current I 3 Reference Duty Cycle 4 Recommended Peak Drive Current 5 Peak Luminous Flux Peak Radiometric Power Dominant Wavelength FWHM - Spectral bandwidth at 50% of Φ 6,7 ...
Page 3
... PT121 Summary Datasheet - Revision 04 - Preliminary Optical and Electrical Characteristics Characteristics at Reference Continuous Drive Current I Reference Drive Current Luminous Flux Radiometric Flux Dominant Wavelength 6,7 Color Saturation FWHM - Spectral bandwidth at 50% of Φ 6,7 Chromaticity Coordinates Forward Voltage Dynamic Resistance Note 1: All ratings are based on operation with a constant heat sink temperature T Note 2: Parameters rated at typical duty cycle and Pulsed operation frequency f> ...
Page 4
... PT121 Summary Datasheet - Revision 04 - Preliminary Absolute Maximum Ratings 1,2 Maximum Current Maximum Operating Junction Temperature Storage Temperature Range Note 1: Luminus PhlatLight LEDs are designed for operation to an absolute maximum forward drive current density of 2.5A/mm 2 3A/mm pulsed (f>240Hz, duty cycle < 60%). Please refer to absolute maximum rating table above for specific absolute maximum cur- rents for the products covered in this datasheet ...
Page 5
... PT121 Summary Datasheet - Revision 04 - Preliminary Luminous Flux variation with Drive Current - Φ 2000 1500 1000 500 (A) F See notes 1,2 on page 6. Dominant Wavelength variation with Forward Current - λ 635 630 625 620 615 (A) F See notes 1,2 on page 6. Forward Voltage variation with Drive current - V 3 ...
Page 6
... Note 1: For Pulsed operation, typical RGB duty cycles used are 25%, 50% and 25% respectively for pulsed operation (T Note 2: Yellow square indicate device operating point under recommended conditions listed in the Optical and Electrical Char- acteristics table. Note 3: Typical Spectrum at recommended peak drive current. ...
Page 7
... PT121 Summary Datasheet - Revision 04 - Preliminary Thermal Resistance definition = 3 mm from core-board hs Thermistor Information The thermistor used in PhlatLight™ devices mounted on core-boards is from Murata Manufacturing Co. The global part number is NCP15XH103J03RC. Please see http://www.murata.com/ or http://www.murata.co.jp for details on calculating thermistor tempera- ture. ...
Page 8
... TOP OF METAL SUBSTRATE TO EMITTING AREA Recommended connector for Anode and Cathode: Panduit Disco Lok Thermistor Connector: MOLEX P/N 53780-0270. Recommended Female: MOLEX P/N 51146-0200 or equivalent For detailed drawing of the PT121 Type CX package, please refer to the DWG-001268document 3.00 AREA 18.00 28.00±0. ...
Page 9
... Red PT-121-G-C11-MPB Green PT-121-B-C11-EPA Blue The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ ...