MT5600BA-V92-GB/IE Multi-Tech Systems, MT5600BA-V92-GB/IE Datasheet - Page 35

• Manufacturer Part Number: MT5600BA-V92-GB/IE
• Description: MODEM V.92 DATA/FAX WORLD
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® IIr

Specifications of MT5600BA-V92-GB/IE

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9 V ~ 12 V
• Mounting Type: Desktop
• Package / Case: 9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1059

Assigning Callback Passwords
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
Front Panel Method
AT Command Method
Front Panel Method
1. Turn on the modem.
2. Starting at the STATUS LCD, press the following buttons on the front panel to turn
1. Open a terminal program, such as HyperTerminal.
2. To store a callback password for the first callback memory location, type
3. To store a callback password for the second callback memory location, type
4. Repeat as many times as necessary, up to memory location 30, until all passwords have
1. Turn on the modem.
2. Starting at the STATUS LCD, press the following buttons on the front panel:
3. Press the Enter button on the front panel to select callback memory location 1. The
4. Press the  or
5. Press the
6. The password must be six to ten characters in length. Repeat steps 4 and 5 until the
7. Press the Enter button again to go to the PASSWORD SETUP LCD.
8. Press
9. Repeat steps 3–7 to enter the next password.
10. Repeat as many times as necessary, up to memory location 30, until all passwords have
callback security on and off:
AT#CBP01=xxxxxxxxxx, where xxxxxxxxxx is the first password, and press E
password must be six to ten characters in length.
AT#CBP02=xxxxxxxxxx, where xxxxxxxxxx is the second password, and press E
Note that the memory location number in the command is incremented by one.
been entered.
ENTER PASSWORD LCD appears.
Note: To backspace or to cancel an entry, press
password is entered, and then press the Enter button to store it. The PASSWORD
STORED LCD should appear.
been entered.
Warning:
correctly. If you attempt to look at a password entry by pressing the Enter button for an
ENTER PASSWORD #n? LCD, it is possible to accidentally erase the entry.
,
•
•
,
To turn on callback security, press
CALLBACK ON? option, and then press the Enter button to select the option.
When remote callback security is turned on, each caller is asked to enter a
password, then is disconnected and called back by the modem. Also, dialing
number locations 0–3, for use with the DS=y dialing command, are replaced by
callback dialing number locations 1–30.
To turn off callback security, press
CALLBACK OFF? option, and then press the Enter button to select the option.
Callers no longer need a password to connect to the modem, the modem is
unable to call them back, and stored dialing number locations 0–3 become
available.
,
,
There is no way to review an entry to confirm that it has been entered
. The ENTER PASSWORD #1? LCD appears.
to go to the ENTER PASSWORD #2? LCD.
button to go to the next letter in the password.
button several times to select the first letter in the password.
,
,
,
,
several times.
,
,
,
,
Chapter 6 – Callback Security
,
,
,
,
to display the
,
to display the
,
NTER
,
NTER
. The
,
.
35
,