MT5634ZBA-GLOBAL Multi-Tech Systems, MT5634ZBA-GLOBAL Datasheet - Page 8

• Manufacturer Part Number: MT5634ZBA-GLOBAL
• Description: MODEM V.90 DATA/FAX GLOBAL
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZBAr

Specifications of MT5634ZBA-GLOBAL

• Data Format: V.90
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Interface: -
• Other names: 881-1149; MT5634ZBA-GLOBAL

Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G)
Location of the Jumpers
Changing the Dial-Up/Leased-Line Jumper
Changing the Voice Jumper
As shipped from the factory, your modem is configured for normal dial-up operation. That is, the modem must
dial a phone number to connect to another modem. To use the modem on a leased line, you must change
jumper J10 to select leased line operation, and J11 to select whether it will be the originating or the answering
modem. If dial-up operation is selected, J11 has no effect.
See Chapter 3 for additional leased line information.
•
•
•
•
•
The speaker jumper (J8) is next to the external speaker jack.
The factory default is the answer position. This makes the modem the answering modem on the leased
line.
To use the modem on a leased line, move the J10 jumper plug from the default dial-up position to the
leased line position.
To make the modem the originating modem on the leased line, move the J11 jumper plug to the originate
position.
The factory default position of the voice jumper is set for a stereo speaker or sound card. A jumper plug
covers both pins of the J8 jumper.
To use the modem with a monophonic external speaker, remove the jumper plug from the J8 jumper pins.
You can store it by placing it on one jumper pin.
Note:
J8 is the Jumper for the Modem with Voice Option
Chapter 2 – Installation
8