PIC18F24K22-I/SP Microchip Technology, PIC18F24K22-I/SP Datasheet - Page 261

• Manufacturer Part Number: PIC18F24K22-I/SP
• Description: IC PIC MCU 16KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F24K22-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 19x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 17 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 15-4:
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
Note 1: For daisy-chained SPI operation; allows the user to ignore all but the last received byte. SSPxOV is still
ACKTIM
R-0
2: This bit has no effect in Slave modes for which Start and Stop condition detection is explicitly listed as
3: The ACKTIM Status bit is active only when the AHEN bit or DHEN bit is set.
set when a new byte is received and BF = 1, but hardware continues to write the most recent byte to
SSPxBUF.
enabled.
ACKTIM: Acknowledge Time Status bit (I
1 = Indicates the I
0 = Not an Acknowledge sequence, cleared on 9
PCIE: Stop Condition Interrupt Enable bit (I
1 = Enable interrupt on detection of Stop condition
0 = Stop detection interrupts are disabled
SCIE: Start Condition Interrupt Enable bit (I
1 = Enable interrupt on detection of Start or Restart conditions
0 = Start detection interrupts are disabled
BOEN: Buffer Overwrite Enable bit
In SPI Slave mode:
In I
In I
SDAHT: SDAx Hold Time Selection bit (I
1 = Minimum of 300 ns hold time on SDAx after the falling edge of SCLx
0 = Minimum of 100 ns hold time on SDAx after the falling edge of SCLx
SBCDE: Slave Mode Bus Collision Detect Enable bit (I
If on the rising edge of SCLx, SDAx is sampled low when the module is outputting a high state, the
BCLxIF bit of the PIR2 register is set, and bus goes idle
1 = Enable slave bus collision interrupts
0 = Slave bus collision interrupts are disabled
AHEN: Address Hold Enable bit (I
1 = Following the 8th falling edge of SCLx for a matching received address byte; CKP bit of the
0 = Address holding is disabled
2
2
R/W-0
C Master mode:
C Slave mode:
This bit is ignored.
1 = SSPxBUF updates every time that a new data byte is shifted in ignoring the BF bit
0 = If new byte is received with BF bit of the SSPxSTAT register already set, SSPxOV bit of the
1 = SSPxBUF is updated and ACK is generated for a received address/data byte, ignoring the
0 = SSPxBUF is only updated when SSPxOV is clear
SSPxCON1 register will be cleared and the SCLx will be held low.
PCIE
SSPxCON3: SSPx CONTROL REGISTER 3
SSPxCON1 register is set, and the buffer is not updated
state of the SSPxOV bit only if the BF bit = 0.
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
2
R/W-0
SCIE
C bus is in an Acknowledge sequence, set on 8
(1)
R/W-0
BOEN
2
Preliminary
C Slave mode only)
2
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
2
(2)
(2)
C mode only)
C mode only)
2
2
SDAHT
C mode only)
C mode only)
R/W-0
th
PIC18(L)F2X/4XK22
rising edge of SCLx clock
2
(3)
C Slave mode only)
SBCDE
R/W-0
th
falling edge of SCLx clock
R/W-0
AHEN
DS41412A-page 261
R/W-0
DHEN
bit 0