81229 Desco, 81229 Datasheet
81229
Manufacturer Part Number
81229
Description
TAPE CLEAR W/SYMBOLS 1" X 72YDS
Manufacturer
Desco
Type
Anti-Staticr
Specifications of 81229
Tape Type
Antistatic - ESD Symbols
Adhesive
Rubber
Backing, Carrier
Cellulose
Thickness
0.0024" (2.4 mils, 0.061mm)
Width
1.00" (25.40mm)
Length
216' (66.0m) 72 yds
Color
Clear
Usage
General Purpose
Temperature Range
14 ~ 160°F (-10 ~ 71°C)
Special Features
Anti-Static
For Use With
81282 - TAPE DISPENSER ESD 2" WIDE
Lead Free Status / RoHS Status
Lead free / Not applicable
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
Lead Free Status / Rohs Status
RoHS Compliant part
© 2010 DESCO INDUSTrIES INC.
Employee Owned
Wescorp Tape Storage and Limited Warranty:
The user must determine the suitability for use of an ESD tape for his particular
application. For best results, tape inventory should be continually replenished. It
is recommended that rolls of tape be stored flat and rotated (flipped over to the
other side) periodically. Tapes should be stored in a dry, well ventilated room with a
reasonably consistent temperature of 68°F (20°C) and be protected from exposure
to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat.
Tape over one year old should be evaluated by the user to determine acceptability for
the user’s application. Desco Industries, Inc. recommends those tracking useful life of
product to use shipping/invoice date as Desco Industries, Inc. expressly warrants that
for a period of one (1) year from the date of purchase, our Wescorp Brand Antistatic
Tape will be free of defects in material (parts) and workmanship (labor). See details of
Limited Warranty online at
*Wescorp is a Desco Industries brand.
No sulfur, surfactants or silicone based material (adhesive, film backing, release
material) is used in the manufacture of our cellulose tape.
Specifications and procedures subject to change without notice
roHS Compliance Statement
None of the following materials are intentionally added in manufacturing this
product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls
(PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive
2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line at Desco.com.
81227
Desco.com/Warranty.aspx
Tape is wound on paper core
81220
*Military organizations sometimes use MIL-STD-1285 for hardware marking and that
document once required the use of the “three arrows in a circle” symbol. That symbol
has been changed for consistency with industry marking to the “hand in triangle” ESD
Susceptibility symbol.” (Ref: ESD TR20.20 section 5.3.14.1)
WESCORP* ESD CELLULOSE tAPE, PAPER CORE
DESCO WESt: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EASt: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
1/4" is 6 mm nominal or
1/2" is 12 mm nominal or 0.472"
3/4" is 18 mm nominal or 0.709"
1"
2"
ESD Clear Cellulose with
ESD Cellulose tape
For general purpose applications
• 2.4 mil (0.0024” or 0.06 mm) total thickness
• Cellulose film resistance 10E10 - 10E11 ohms per ANSI/ESD S11.11
• Rubber based adhesive absorbs moisture
• Adhesive surface resistance 10E10 - 10E11 ohms
• Temperature Range -10°C to +71°C (14°F - 160°F); meets MIL-B-81705 of
• Available in clear, clear with ESD symbols, and clear with ESD symbols
• Durable marking; symbols printed in between film and adhesive
ESD Clear Cellulose
Tape widths are nominal
metric ±0.8 mm (±1/32")
100°C for 10 minutes maximum
with yellow stripe. Marking includes ESD sensitivity symbols of Mil
STD-1285* and ANSI/ESD S8.1.
is 24 mm nominal or
is 48 mm nominal or
Symbols
tape
FAX (781) 575-0172
0.236"
0.945"
1.890"
81220
81223
81227
0.5"
Width - See Metric Note
81221
81224
81228
.75"
Desco.com
81222
81225
81229
1"
DRAWING NUMBER
Imprint on Clear Cellulose
81226
81230
2"
Antistatic Tape
81220
with Symbols
Width tolerance ±1/32"
Core
1"
3"
3"
Made in America
Length
72 yds
36 yds
72 yds
DAtE:
April
2010