79210 Desco, 79210 Datasheet - Page 6

• Manufacturer Part Number: 79210
• Description: TAPE CLEAR ESD W/SYM 3/4"X72YDS
• Manufacturer: Desco
• Type: Anti-Staticr

Specifications of 79210

• Tape Type: Antistatic - ESD Symbols
• Adhesive: Rubber
• Backing, Carrier: Cellulose
• Thickness: 0.0024" (2.4 mils, 0.061mm)
• Width: 0.75" (19.05mm) 3/4"
• Length: 216' (66.0m) 72 yds
• Color: Clear
• Usage: Packaging
• Temperature Range: 14 ~ 160°F (-10 ~ 71°C)
• Size: 3/4 in x 72 yds / 3 in Core
• Special Features: Anti-Static
• Application: General purpose
• Diameter, Core: 3 in.
• Temperature, Storage: 20 °C
• Roll Length: 72yard
• Rohs Compliant: NA
• For Use With: 81282 - TAPE DISPENSER ESD 2" WIDE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TB-3010 Page 6 of 7
Material Safety Data Sheet
May be used to comply with
OSHA’s Hazard Communication Standard,
29 CFR 1910.1200, Standard must be
consulted for specific requirements.
IDENTITY (As Used on Label and List)
Wescorp Antistatic Hi Temp Polyimide Tape
Section I
Manufacturer’s Name
Desco Industries Inc.
Address (Number, Street, City, State, and Zip Code)
3651 Walnut Avenue, Chino, CA 91710
Date Prepared
2-1-2006
Section II - Physical/Chemical Characteristics
Polyimide Film
Electrically conductive particles embedded in a layer of polysiloxane adhesive
Section III - Hazardous Ingredients
No hazardous materials present
(1) According to Commission Directive 88/379/EEC (Article 3 6aa).
Section IV - First Aid Measures
4.1. Skin: No irritation is expected from handling the tape, however ensure good industrial hygiene and wash exposed areas with soap
and Water.
4.2. Eyes: Rinse opened eye for several minutes under running water.
4.3. Inhalation: Not a probable route of exposure for adhesive tape. Exposure to the encapsulated electrically conductive articles in the
adhesive layer is not likely.
4.4. Ingestion: Not a probable route of exposure for adhesive for adhesive tape. Treat symptomatically.
4.5. Other first aid information: Not known
Section V - Fire Extinguishing Measures
5.1. Extinguishing media: Carbon dioxide, foam, dry powder, or fine water spray.
5.2. Unsuitable extinguishing media: None known
5.3. Unusual firefighting hazards: None known
5.4. Special firefighting procedures: Self-contained respirator should be worn.
5.5. Other recommendations: None known
5.6. Combustion products: Polyimide film chars but does not burn in air, however it will burn in an atmosphere of 100% oxygen. The major
off-gases are carbon dioxide and carbon monoxide. The silicone adhesive layer also tends to char leaving residues of silica and off-gases
containing carbon dioxide, traces of incompletely burned carbon products and formaldehyde.
Section VI - Accidental Release Measure
6.1. Personal protection: Avoid contact with eyes.
6.2. Precautions to protect the environment: None established
6.3. Clean up procedure: Pick up to prevent floor
Section VII - Handling and Storage
7.1. Handling precautions: Avoid contact with eyes. Ensure good industrial hygiene and wash skin with soap and water after contact.
7.2. Storage: No special measures are required.
7.3. Unsuitable packaging materials : None known.
7.4. Incompatibilities: None known.
7.5. Other information: None known.
Section VIII - Exposure Controls and Personal Protection
8.1 Exposure controls: Safe handling/usage of PPI RD-042 at high temperatures (above 200°C/392°F) requires adequate ventilation. Using
small quantities normal air circulation may be adequate otherwise further ventilation measures are recommended.
8.2. Exposure controls for hazardous components: No hazardous materials present
8.3. Personal protective equipment:
Respiratory: Not required for normal handling.
Protective gloves: Not required for normal handling, if tape is hot gloves are recommended as good industrial practice.
Eye/Face: Safety glasses are recommended as good industrial practice.
Industrial Hygiene: Wash after handling, especially before eating, drinking or smoking. Exercise good industrial hygiene practice.
DESCO EAST - 90 Hudson Road, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site: Desco.com
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
NFPA Designation 704
Degree of Hazard:
4 = Extreme
3 = High
2 = Moderate
Emergency Telephone Number
Signature of Preparer (Optional)
[phone]
Telephone Number for Information
[phone]
Note: Blank spaces are not permitted. If any item it not applicable, or no
information is available,the space must be marked to indicate that.
1 = Slight
0 = Insignificant
Special Hazard
Health
(Blue)
0
0
0
© 2006 DESCO INDUSTRIES INC.
Flammability
0
(Red)
Reactivity
(Yellow)
Employee Owned