81261 Desco, 81261 Datasheet
81261
Manufacturer Part Number
81261
Description
TAPE MASKING HI TEMP 3/4"X60YDS
Manufacturer
Desco
Type
Anti-Staticr
Specifications of 81261
Tape Type
Masking, High Temperature
Adhesive
Rubber
Backing, Carrier
Crepe Paper
Thickness
0.0070" (7.0 mils, 0.178mm)
Width
0.75" (19.05mm) 3/4"
Length
180' (55.0m) 60 yds
Color
Natural
Usage
Wave Soldering
Temperature Range
-32 ~ 275°F (-35 ~ 135°C)
Application
Masking PCB gold features for wave soldering
Diameter, Core
3 in.
Special Features
Anti-Static
Temperature, Storage
20 °C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
Lead Free Status / Rohs Status
RoHS Compliant part
© 2009 DESCO INDUSTRIES INC.
Employee Owned
Specifications and procedures subject to change without notice.
*Wescorp is a Desco Industries brand.
Users shall determine the suitability of the product for its intended use.
For best results, tape inventory should be continually replenished. It is
recommended that rolls of tape be stored flat and rotated (flipped over to
the other side) periodically. Tapes should be stored in a dry, well ventilated
room with a reasonably consistent temperature of 68°F (20°C) and be
protected from exposure to direct sunlight. Tape should not be stored in
ultraviolet sunlight, moisture, or heat.Tape over one year old should be
evaluated by the user to determine acceptability for the user’s application.
Desco Industries, Inc. recommends those tracking useful life of product to
use shipping/invoice date as Desco Industries, Inc. expressly warrants that
for a period of one (1) year from the date of purchase, our Wescorp Brand
ESD Tape will be free of defects in material (parts) and workmanship (labor).
See details of Limited Warranty online at
Tape is wound on
a paper core.
Desco.com/Warranty.aspx
The user must determine
the suitability for use of the
product for its intended use
ESD High Temp Masking Tape
Used in applications masking PCB gold features for wave soldering
• Waterproof
• Does tribocharge, but has minimal charge retention
• 7 mil (0.007” or 0.18 mm) total thickness
• Adhesive surface 1.2 x 10E11 ohms
• Film resistance < 1 x 10E11 ohms tested per ANSI/ESD S11.11 at 50% RH
• Max Temp 135°C (275°F) 45 minutes max
• Non-toxic
• pH neutral
• Non-corrosive
• Tensile: 22 lbs./in.
• Adhesion to Steel: 35 oz./inch2
• Elongation: 8%
• Temperature Range: -32°F to +275°F
• Adhesive Mass: Natural Rubber
• Adhesive: Non-Staining
• Excellent Conformability
Note: Waterproof release coating does generate static charges during
unrolling. We recommend slow unwinding, utilizing an Ionizer to neutralize
charge.
WESCORP* ESD HIGH TEMP MASKING TAPE, PAPER CORE
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
ESD High Temp Masking
1/2” is 12 mm nominal or 0.472”
3/4” is 18 mm nominal or 0.709”
1”
Tape
Tape widths are nominal
metric ±0.8 mm (±1/32”).
is 24 mm nominal or 0.945”
FAX (781) 575-0172
81260
Width - See Table Below
0.5”
81261
.75”
Desco.com
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing
this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Desco Industries Inc. letter on-line
at Desco.com.
81262
1”
DRAWING
NUMBER
81260
Width tolerance ±1/32”
Core
3”
Length
60 yds
November
DATE:
2009