RAISLETAPE54 3M, RAISLETAPE54 Datasheet - Page 87

• Manufacturer Part Number: RAISLETAPE54
• Description: TAPE ROHS AISLE MARKING 54' ROLL
• Manufacturer: 3M

Specifications of RAISLETAPE54

• Tape Type: Marking - Printed "Lead-Free Area"
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0060" (6.0 mils, 0.152mm)
• Width: 3.00" (76.20mm) 1/4'
• Length: 54' (16.5m) 18 yds
• Color: White, Green Print
• Usage: Aisle Marking
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Temperature Range: -
• Adhesive: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 51111764688; 80000954547

Liners:
A - White 5.0 mil (0.13 mm) thick polyolefin with silicone release coating
B - Brown 83# polykraft liner printed with "3M™" in green. Good for diecutting directly against liner.
C - Red 4.5 mil (0.11 mm) thick polyolefin with no silicone release coating
D - Clear 4.0 mil (0.10 mm) thick polyolefin with silicone release coating
E - White 5.0 mil (0.13 mm) thick polyethylene with silicone release coating
F - Brown 83# polykraft liner printed with "3M™ Dual Lock™" in green. Good for diecutting directly against liner.
Footnotes:
1) Type 400 is not recommended to be engaged to other type 400 fasteners. As well, type 170 should not be engaged with type 170.
2) Acrylic PSAs are best suited for outdoor or high humidity applications for medium to high energy surfaces.
3) Engaged thickness is for products with the same backcoating. You can mix products with different backcoatings to obtain an even greater variety of engaged thicknesses. Any of
these 3M™ Dual Lock™ Reclosable Fasteners can be engaged with 3M™ Scotchmate™ Reclosable Fasteners providing a quick grab closure with high strength and limited cycle life.
4) Able to support indicated weight in a one square inch system static overlap shear for 10,000 minutes, at indicated temperature.
Notes:
Suggest 4 square inches of fastener per pound of load as a starting point for evaluation of long term performance. Suggest type 250 engaged to type 250 as a starting point for
evaluations. Tensile strength increases in the following order: 170/250 < 250/250 < 170/400 < 250/400. Maximum widths are 6". All products available on 50 yard rolls except 3M™
Dual Lock™ Reclosable Fasteners SJ3756, SJ3789 and SJ3757 which are 45 yards and SJ3481 which comes in four foot strips.
This information should be considered representative only, for help in narrowing the list of possible fasteners for further and more detailed evaluation, and should not be used for specification purposes.
User is responsible for determining whether the 3M product is fit for the desired end use. Refer to specific product technical data sheets for more detailed product performance information.
SJ3542
SJ3540
SJ3541
SJ3754
SJ3223
SJ3753
SJ3543
SJ3742
SJ3780
SJ3741
SJ3462
SJ3460
SJ3461
SJ3799
SJ3768
SJ3766
SJ3481
3M
SJ4570
SJ4575
SJ4580
Product
number
™
Dual Lock
Product Color
Type
170
250
400
170
250
400
250
170
250
400
170
250
400
170
250
400
400
705
705
705
™
1
Low Profile Reclosable Fasteners
Black
Black
Clear
Black
Clear
Black
Black
Clear
Black
Clear
Polypropylene
Polypropylene
Backcoating
Adhesive
non woven
Clear acrylic
Clear acrylic
Clear acrylic
Synthetic
rubber
White
None
None
2
None
None
Liner
None
None
None
A
C
F
F
Engaged
Thickness
Inches (mm)
0.23 (5.7)
0.35 (8.9)
0.15 (3.9)
0.15 (3.9)
0.23 (5.7)
0.35 (8.9)
(2.5)
(2.5)
(3.0)
0.10
0.10
0.12
3
120°F (49°C)
200°F (93°C)
200°F (93°C)
200°F (93°C)
200°F (93°C)
200°F (93°C)
158°F (70°C)
158°F (70°C)
200°F (93°C)
Temperature
Performance
Wt. in grams
(Temp: °F/°C)
1,000g
1,000g
1,000g
1,000g
1,000g
1,000g
500g
500g
500g
4
Comments
For indoor use or attachment to low surface energy substrates.
One roll (1" x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered
as MP3541/3542. SJ3542V is packaged for clean room use.
SJ3540V is packaged for clean room use.
One roll (1" x 4.9 yd.) each of SJ3541 and SJ3542 can be ordered
as MP3541/3542. SJ3541V is packaged for clean room use.
Certified to Ford WSB M15P35 Type V.
Product appears white.
For attachment to fabrics via sewing, or to wood and similar
substrates using staples. Certified to FMVSS 302, Ford WSB
M15P35 Type IV.
Certified to FMVSS 302, Ford WSB M15P35 Type IV.
Product with marked splices: SJ3241.
For attachment to fabrics via sewing, or to wood and
similar substrates using staples. Excellent UV resistance in a
translucent product, allowing substrate color to be easily
seen through the fastener.
For ultrasonic bonding to polypropylene.
Certified to FMVSS 302, Ford WSB M15P35 Type IV.
Rigid backing for mechanical attachment (screws, rivets, etc.).
Only available in 4-foot strips. Certified to FMVSS 302.
Thin adhesive bonds well to low surface energy substrates.
One roll (5/8" x 10’) of SJ4570 can be ordered as MP4570.
Black, bonds well to LSE substrates.
Aggressive, tacky adhesive for general bonding to most medium
and high energy surfaces. Excellent for outdoor and high
humidity conditions. Certified to Ford WSB M15P35 Type III.
87