2155-1-1/2X22FT 3M, 2155-1-1/2X22FT Datasheet

no-image

2155-1-1/2X22FT

Manufacturer Part Number
2155-1-1/2X22FT
Description
RUBBER SPLICING TAPE 1.5" X 22'
Manufacturer
3M
Series
Temflex™ 2155r
Datasheet

Specifications of 2155-1-1/2X22FT

Tape Type
Splicing
Adhesive
Rubber, Self Fusing
Backing, Carrier
Rubber
Thickness
0.030" (30 mils, 0.762mm)
Width
1.50" (38.10mm) 1 1/2"
Length
22' (6.7m) 7.3 yds
Color
Black
Usage
Insulating, Moisture Sealing
Temperature Range
176°F (80°C)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
Other names
00054007503491
05400750349
215511/2X22FT
5400750349
54007503491
HT002001119
Temflex
2155 Rubber Splicing Tape
Data Sheet
Product Description
3M Temflex
self-fusing rubber electrical insulating tape. It is designed for
low voltage electrical insulating and moisture sealing
applications. Temflex 2155 is Underwriters Laboratories
(UL) Listed for use up to 600 volts.
• UL listed, File E129200
• Compatible with solid dielectric cable insulations
• Self-fusing tape
• Flexible over a wide temperature range
Applications (600 volt maximum)
• Bolted connections
• Service drops
• Lightning connections
• Ground rod connections
• Motor leads
Color
Temperature Rating
UL 510
Thickness
UL 510
Fusion
ASTM D4388, Type I
Tensile Strength
UL 510
Elongation
UL 510
Dielectric Breakdown
UL 510
Note: These are typical values and should not be used for
Typical Data/Physical Properties
Test Method
specification purposes.
2155 Rubber Splicing Tape is a conformable
600 V/mil (23,6 KV/mm)
300 psi (2,07 N/mm
30 mils (0,76 mm)
176°F (80°C)
Typical Value
Black
700%
Pass
2
)
Specification
The tape must be rubber based and capable of operating at
temperatures up to 80°C.
The tape must not split or crack when exposed to normal
operating temperatures. The tape must be compatible with
synthetic cable and wire insulations. The tape shall not be
corrosive to aluminum, or copper conductors.
The tape shall be 30 mils thick and comply with the
requirements of UL 510 for rubber insulating tape.
Temflex 2155 tape should be applied in half-lapped layers
until desired insulation build up is reached. Stretch the tape
to 3/4 of its original width during application for good
conformability and to obtain a moisture tight seal.
Temflex 2155 tape should be overwrapped for mechanical
protection with half-tapped layers of either 3M Vinyl
Electrical Tape or Temflex 1755 Cotton Friction Tape.
Temflex 2155 has a three-year shelf life (from date of
manufacture) when stored under the following recommended
storage conditions. Store behind present stock in a clean, dry
place at a temperature of 70°F (21°C) and 40-50% relative
humidity. Good stock rotation is recommended.
Temflex 2155 rubber splicing tape is available from your
local 3M authorized distributor in the following roll sizes:
Installation
Shelf Life
Availability
3/4 in. x 22 ft. (19 mm x 6,7 m)
1 1/2 in. x 22 ft. (38 mm x 6,7 m)

2155-1-1/2X22FT Summary of contents

Page 1

... Electrical Tape or Temflex 1755 Cotton Friction Tape. Typical Value Shelf Life Black Temflex 2155 has a three-year shelf life (from date of manufacture) when stored under the following recommended 176°F (80°C) storage conditions. Store behind present stock in a clean, dry place at a temperature of 70°F (21°C) and 40-50% relative 30 mils (0,76 mm) humidity ...

Page 2

... OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the shelf life period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted ...