4408-1"X36YD 3M, 4408-1"X36YD Datasheet - Page 4

• Manufacturer Part Number: 4408-1"X36YD
• Description: TAPE VINYL FOAM 1/8" X 1"
• Manufacturer: 3M
• Series: 4408r

Specifications of 4408-1"X36YD

• Tape Type: Double Coated, Double Sided
• Adhesive: Acrylic, 430
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.125" (125 mils, 3.175mm) 1/8"
• Width: 1.00" (25.40mm)
• Length: 108' (32.9m) 36 yds
• Color: Black
• Usage: General Purpose
• Temperature Range: 70 ~ 100°F (21 ~ 38°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-03291; 3M44081; 4408 1"; 70002456054

Recognition/
Certification
3M
4432
For Additional
Information
Important Notice
Limitation of Remedies
and Liability
3
Bonding Systems Division
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000
™
•
4416 • 4408
Double Coated Vinyl Foam Tapes
MSDS: 3M has not prepared MSDSs for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, the products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
3
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the
method of application. Please remember that many factors can affect the use and performance of a
product in a particular application. The materials to be bonded with the product, the surface preparation
of those materials, the product selected for use, the conditions in which the product is used, and the time
and environmental conditions in which the product is expected to perform are among the many factors
that can affect the use and performance of a
use and performance of a
control, it is essential that the user evaluate the
purpose and suitable for the user’s method of application.
If the
REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE
3
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,
warranty, or strict liability.
This Bonding Systems Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550
or visit www.3M.com/bonding. Address correspondence to:
Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada, phone:
1-800-364-3577. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
3
M product is proved to be defective, THE EXCLUSIVE REMEDY, AT
3
M product, some of which are uniquely within the user’s knowledge and
- 4 -
Recycled Paper
40% pre-consumer
10% post-consumer
Recycle, Neg
3
M product is fit for a particular purpose and suitable for user’s
3
M product. Given the variety of factors that can affect the
ISO 9002
3
M product to determine whether it is fit for a particular
3
M Bonding Systems Division,
3
M’S OPTION, SHALL BE TO
Printed in U.S.A.
©3M IPC 2000
3
M PRODUCT.
3
70-0709-3847-0
M Center,
3
M