9472LE 4"X60YD 3M, 9472LE 4"X60YD Datasheet - Page 2

• Manufacturer Part Number: 9472LE 4"X60YD
• Description: LAMINATING ADHESIVE 4"X60YDS
• Manufacturer: 3M
• Series: 9472LEr

Specifications of 9472LE 4"X60YD

• Tape Type: Laminating
• Adhesive: Acrylic
• Backing, Carrier: Polycoated Kraft Liner
• Width: 4.00" (101.60mm) 1/3'
• Length: 180' (55.0m) 60 yds
• Usage: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Color: -
• Thickness: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-56050; 70-0062-9198-6; 70006291986; 9472LE; 9472LE; Q3264015; SCP284

Properties and
Performance
(Not for specification purposes)
Adhesion Properties
Not for specification purposes
Processing
Bond Build Up
Humidity Resistance
U.V. Resistance
Water Resistance
Temperature Cycling
Resistance
Chemical Resistance
Temperature Resistance
Low Service Temperature
Peel Adhesion - (Newtons/10 mm) ASTM D3330, modified: 90º Peel, 51 micron aluminium
backing.
Stainless Steel
ABS
Polypropylene
Slitting & Die-Cutting:
This adhesive is very aggressive and may be difficult to die cut. Chilling the adhesive to
between 2 C and 10º C will improve the processability. In addition, dies can be
lubricated with Laminoleum evaporative stamping oil
Roll Laminating:
A combination of metal and rubber rollers with moderate pressure is recommended.
Note: Please refer to the 3M Slitting/Die-Cutting Technical Bulletin for further details.
The bond strength of #300LSE “Hi-Strength” Acrylic
Adhesive increases as a function of time and temperature,
and has very high initial adhesion.
High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after
exposure for 7 days at 32°C and 90% relative humidity.
When properly applied, nameplates and decorative trim
parts are not adversely affected by exposure.
Immersion in water has no appreciable effect on the bond
strength. After 100 hours at room temperature, the high
bond strength is maintained.
High Bond strength is maintained after cycling four times
through:-
When properly applied, nameplate and decorative trim
parts will hold securely after exposure to numerous
chemicals including oil, mild acids and alkalis.
The #300LSE “Hi-Strength” adhesive is usable for short
periods (minutes, hours) at room temperatures up to
148ºC, and for intermittent longer periods of time (days,
weeks) up to 93ºC.
- 40ºC
15 minute dwell room temp.
N/10mm
11.9
11.2
12.6
4 hours at 70ºC
4 hours at -29ºC
16 hours at 22ºC
Date : July 2000
Laminating Adhesive 9472LE
72 hour room temp.
N/10mm
15.3
14.0
14.9
2