9472LE 4"X60YD 3M, 9472LE 4"X60YD Datasheet - Page 5

• Manufacturer Part Number: 9472LE 4"X60YD
• Description: LAMINATING ADHESIVE 4"X60YDS
• Manufacturer: 3M
• Series: 9472LEr

Specifications of 9472LE 4"X60YD

• Tape Type: Laminating
• Adhesive: Acrylic
• Backing, Carrier: Polycoated Kraft Liner
• Width: 4.00" (101.60mm) 1/3'
• Length: 180' (55.0m) 60 yds
• Usage: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Color: -
• Thickness: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-56050; 70-0062-9198-6; 70006291986; 9472LE; 9472LE; Q3264015; SCP284

3M
8132LE • 8153LE • 9453LE • 9471LE • 9472LE • 9653LE • 9671LE • 9672LE • 9698LE
Application Ideas:
Limitation of Liability
3
Industrial Adhesives and Tapes Division
Converter Markets
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-223-7427 • 651-778-4244 (fax)
www.3M.com/converter
Storage
Shelf Life
Technical Information
Product Use
Warranty,
Limited Remedy,
and Disclaimer
™
Adhesive Transfer Tapes with Adhesive 300LSE
Processing:
Slitting and die-cutting: This adhesive is very aggressive and may be difficult to
convert depending on your application requirements. Chilling the adhesive between
35°F and 50°F will improve the processability. In addition, dies can be lubricated
with Laminoleum evaporative stamping oil, which is available from Metal
Lubricants Company (708-333-8900), or with Lubri-Blade 907 from Ceramic
Technologies Inc. (800-258-8495). You may also refer to our Technical Bulletin on
300LSE converting. (70-0707-6205-2)
Roll Laminating: A combination of metal and rubber rollers with moderate
pressure is recommended.
Note: Please refer to the Technical Bulletin on slitting. (70-0709-3905-6)
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
Store at room temperature conditions of 72°F (22°C) and 50% relative humidity.
Storage in a plastic bag is recommended.
If stored under proper conditions, product retains its performance and properties for
two years from date of manufacture.
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
- 5 -
Recycled Paper
40% pre-consumer
10% post-consumer
ISO 9001: 2000
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2009
70-0709-3795-1
(5/09)