9703 (1/2") 3M, 9703 (1/2") Datasheet - Page 2

• Manufacturer Part Number: 9703 (1/2")
• Description: TAPE CONDUCTIVE ADHESIVE 1/2"
• Manufacturer: 3M
• Series: 9703r

Specifications of 9703 (1/2")

• Tape Type: Conductive Adhesive
• Adhesive: Pressure Sensitive Adhesive (PSA)
• Backing, Carrier: Polycoated Kraft Liner
• Thickness: 0.0020" (2.0 mils, 0.051mm)
• Width: 0.50" (12.70mm) 1/2"
• Length: 108' (32.9m) 36 yds
• Color: Clear
• Usage: Electrical Bonding
• Temperature Range: 60 ~ 158°F (15 ~ 70°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 3M970312; 70-0062-4287-2; 70006242872; 9703 1/2"

3M
9703
Typical Physical
Properties and
Performance
Characteristics
Available Sizes
™
Electrically Conductive Adhesive Transfer Tape
Adhesive Properties:
Peel Adhesion to Stainless Steel
(ASTM D3330), 2 mil Aluminum foil used as backing
Outgassing:
Temperature Performance
Shelf Life and Storage
Conditions
Electrical Properties:
Insulation Resistance
Contact Resistance
Contact Resistivity
Current Carrying Capacity
Minimum Gap
Minimum Overlap Area
1. Based upon ASTM D-257
2. 4 wire resistance measurement, 2500 mil
3. Estimated, customers are required to qualify the maximum current capability for their application.
4. Minimum free space between adjacent conductors recommended to ensure electrical isolation. Customers may
5. Minimum recommended conductor overlap area (pad area) in the interconnection of individual circuit lines to ensure
6. Application Use Temperature range of the 3M™ Electrically Conductive Adhesive Transfer Tape 9703 may be
Slit Tape Width
Normal Slitting Tolerance:
*Contact your 3M Technical Service Engineer for rolls wider than 12 inches.
Note: The following technical information and data should be considered representative
traces (50 mil wide) on PET flex circuit. Contact your 3M Technical Service Engineer for more details of this testing.
qualify finer pitch performance in their applications.
Z-Axis conduction.
increased with the use of a mechanical clamping system as determined by the end use customer. The temperature
range must not exceed -20 to +70°C. (See page 3 for more information on mechanical clamping.)
(NASA SP-R-0022
or ASTM E595)
0.25 to 0.5 inch
(6.9 mm to 13 mm)
0.5 to 12 inch*
(13 mm to 354 mm)
or typical only and should not be used for specification purposes.
4
2
2
Dwell Time
1
24 hour
5
15 min
1 hour
6
3
- 2 -
125°C, 24 hrs, 2 x 10
Total Mass Loss (TML)
Collected Volatile Condensable Materials (CVCM)
Application Use Temperatures: -20 to +40°C
Application Storage Temperatures: -30 to +70°C
See also the Application section of this document
Tape in roll form: Shelf life 24 months from the date of
manufacture when stored in original cartons at 21°C (70°F)
and 50% relative humidity.
2
overlap area, 0.5 Ohm measured resistance between overlaping silver ink
Standard Length
> 35 oz./in. (3.82 N/cm)
50 oz./in. (5.45 N/cm)
55 oz./in. (6.00 N/cm)
(32.9 m)
(32.9 m)
36 yds.
36 yds.
23°C (72°F)
-6
3.4 x 10
1.25 milliOhm-in
1.6 Ohm-cm
1 amp/in
15 mil (0.4 mm)
5000 mil
Torr vacuum
0.03125 in.
(0.8 mm)
Temperature
14
2
2
(3.2 mm
Ohms/
2
50 oz./in. (5.45 N/cm)
60 oz./in. (6.54 N/cm)
65 oz./in. (7.08 N/cm)
Maximum Length
2
)
70°C (158°F)
108 yds.
(32.9 m)
(98.8 m)
36 yds.
0.01%
0.7%