9495LE 3/4"X60YD 3M, 9495LE 3/4"X60YD Datasheet - Page 4

• Manufacturer Part Number: 9495LE 3/4"X60YD
• Description: TAPE DBL COATED 9495LE 3/4"X60YD
• Manufacturer: 3M
• Series: 9495LEr

Specifications of 9495LE 3/4"X60YD

• Tape Type: Double Coated, Double Sided
• Adhesive: Acrylic, 300LSE
• Backing, Carrier: Carrier - Polyester, Liner - Polycoated Kraft
• Thickness: 0.0067" (6.7 mils, 0.170mm)
• Thickness - Adhesive: 0.0062" (6.2 mils, 0.157mm)
• Thickness - Backing, Carrier, Liner: 0.0005" (0.5 mils, 0.013mm)
• Width: 0.75" (19.05mm) 3/4"
• Length: 180' (55.0m) 60 yds
• Color: Clear
• Usage: Holding, Joining, Mounting
• Temperature Range: 70 ~ 100°F (21 ~ 38°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 00-021200-56496-3; 3M9041; 70-0062-9456-8

3M
with Adhesive 300LSE
9474LE • 9495LE
Storage
Shelf Life
Application Ideas
Application Equipment
Environmental
Performance
™
High Strength Double Coated Tape
Humidity Resistance: High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for 7 days at
90°F (32°C) and 90% relative humidity.
UV Resistance: When properly applied, nameplates and decorative trim parts are
not adversely affected by exposure.
Water Resistance: Immersion in water has no appreciable effect on the bond
strength. After 100 hours at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance: High bond strength is maintained after cycling
four times through:
Chemical Resistance: When properly applied, nameplate and decorative trim parts
will hold securely after exposure to numerous chemicals including oil, mild acids
and alkalis.
• Foam to powder coated painted surfaces.
• Low surface energy plastic adhesion.
To apply adhesives in a wide web format, lamination equipment is required to
ensure acceptable quality. To learn more about working with pressure-sensitive
adhesives please refer to technical bulletin, Lamination Techniques for Converters
of Laminating Adhesives (70-0704-1430-8).
For additional dispenser information, contact your local 3M sales representative, or
the toll free 3M sales assistance number at 1-800-362-3550.
Store in original cartons at 70°F (21°C) and 50% relative humidity.
If stored under proper conditions, product retains its performance and properties for
two years from date of manufacture.
4 hours at 158°F (70°C)
4 hours at -20°F (-29°C)
4 hours at 73°F (22°C)
- 4 -