5413 AMBER 1/2IN X 36YD 3M, 5413 AMBER 1/2IN X 36YD Datasheet - Page 3

• Manufacturer Part Number: 5413 AMBER 1/2IN X 36YD
• Description: TAPE POLYIMIDE HIGH TEMP 1/2"
• Manufacturer: 3M
• Series: 5413r

Specifications of 5413 AMBER 1/2IN X 36YD

• Tape Type: Masking
• Adhesive: Silicone Thermosetting
• Backing, Carrier: Polyimide
• Thickness: 0.0027" (2.7 mils, 0.069mm)
• Width: 0.50" (12.70mm) 1/2"
• Length: 108' (32.9m) 36 yds
• Color: Amber
• Usage: Masking, High Temperature
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 021200-16172; 2120016172; 21200161728; 3M541312; 5413 1/2"; 5413 (1/2"); 70-0160-3920-1; 70016039201

Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures:
(SCBA).
Unusual Fire and Explosion Hazards:
Accidental Release Measures: Not applicable.
7.1 HANDLING
Avoid skin contact with hot material. This product is considered to be an article which does not release or otherwise result in
exposure to a hazardous chemical under normal use conditions.
7.2 STORAGE
Not applicable.
8.1 ENGINEERING CONTROLS
Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Not applicable.
8.2.2 Skin Protection
Gloves are not required.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
8.2.4 Prevention of Swallowing
Not an expected route of exposure.
8.3 EXPOSURE GUIDELINES
None Established
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM) Polyimide Film Tape 5413
SECTION 6: ACCIDENTAL RELEASE MEASURES
SECTION 7: HANDLING AND STORAGE
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
No unusual fire or explosion hazards are anticipated.
07/07/2006
Page
3 of 7