88 SUPER (3/4"X66') 3M, 88 SUPER (3/4"X66') Datasheet - Page 3

• Manufacturer Part Number: 88 SUPER (3/4"X66')
• Description: TAPE SUPER 88 VINYL 3/4 X 66 FT
• Manufacturer: 3M
• Series: Scotch® Super 88r

Specifications of 88 SUPER (3/4"X66')

• Tape Type: Electrical
• Adhesive: Pressure Sensitive Adhesive (PSA)
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0085" (8.5 mils, 0.216mm)
• Width: 0.75" (19.05mm) 3/4"
• Length: 66' (20.1m) 22 yds
• Color: Black
• Usage: General Purpose
• Temperature Range: 176°F (80°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 00054007061434; 054007-06143; 05400706143; 3M88; 3M88A; 5400706143; 54007061434; 80-6108-3386-7; 80610833867; 88 SUPER(3/4"X66'); SUPER88/06143

Scotch
Engineering/
Architectural
Specifications
Installation
Techniques
Availability
Shelf Life & Storage
Important Notice
Warranty; Limited Remedy;
Limited Liability
3M and Scotchfil are trademarks of 3M Company.
Scotch is a registered trademark of 3M Company.
3
Electrical Markets Division
6801 River Place Blvd.
Austin, TX 78726-9000
800.245.3573
FAX: [phone]
www.3M.com/electrical
®
Vinyl Electrical Tape Super 88
Primary electrical insulation (branch wiring in wet or dry locations): All splices
600-volt wire rated 105°C (220°F) and below shall be insulated with a minimum of two
half-lapped layers of Scotch
irregular surfaces shall be padded with 3M™ Scotchfil™ Electrical Insulation Putty or
Scotch
Mechanical Protection (outer jacketing)
All rubber and thermoplastic insulating high voltage power cable tape splices and
repairs shall be over wrapped with at least two half-lapped layers of Scotch
Super 88.
Scotch
produce a uniform wind (for most applications this tension will reduce the tape’s width
to approximately 5/8 of its original width). On pigtail splices, the tape shall be
wrapped beyond the end of the wires and then folded back, leaving a protective
cushion to resist cut-through. Wrap tape up-hill, taping from a smaller diameter
surface to a larger diameter surface. Apply the tape with no tension on the last wrap
to prevent flagging.
Please contact your local distributor; available from 3M.com/electrical [Where to Buy]
or call 1-800-245-3573.
This product has a 5-year shelf life from date of manufacture when stored in a
humidity controlled storage (10°C/50ºF to 27°C/80ºF and <75% relative humidity).
All statements, technical information, and recommendations related to 3M’s products are based on information
believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product, which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order, shall have no force or effect unless expressly agreed upon,
in writing, by an authorized officer of 3M.
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
®
®
Linerless Rubber Splicing Tape 130C prior to insulating with this tape.
Tape Super 88 shall be applied in half-lapped layers with sufficient tension to
Please recycle
© 3M 2010 All rights reserved
78-8124-4857-5 F
3 of 3
®
Vinyl Electrical Tape Super 88. All connectors having
®
Tape