RTV60-1P MG Chemicals, RTV60-1P Datasheet - Page 3
![no-image](/images/manufacturer_photos/0/4/432/mg_chemicals_sml.jpg)
RTV60-1P
Manufacturer Part Number
RTV60-1P
Description
POTTING COMPOUND RED HIGH TEMP
Manufacturer
MG Chemicals
Series
RTVr
Type
Potting Compound, 2 Partr
Specifications of RTV60-1P
Features
High Temperature
Product
Silicones
Size
1 pint
Application
Excellent for potting and encapsulating electric motors and transformers
Chemical Component
Silicone
Color
Red
Dielectric Strength
17.7 KV⁄mm
Elongation
120%
Hardness
57 (Shore A)
Primary Type
Adhesive
Special Features
High Temperature
Specific Gravity
1.48
Temperature Range
-54 to +260 °C
Temperature, Rating
-54 to +260 °C
Tensile Strength
6.86 MPa
Thermal Conductivity
0.31 W⁄m.°K
Time, Cure
24 hr
Viscosity
47000 cps
Volume Resistivity
4.4 x 10^14 Ohm.cm
Weight
1 Pint
For Use With/related Products
Multi-Purpose
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
SENSITIVITY TO MECHANICAL IMPACT:
SENSITIVITY TO STATIC DISCHARGE
EXTINGUISHING MEDIA
SPECIAL FIRE FIGHTING PROCEDURES
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
RESPIRATORY PROTECTION
PROTECTIVE GLOVES
RTV60 001-Kit (1.0LBS-0.454KG)
SILICONE RUBBER
Sensitivity to static discharge is not expected.
All standard extinguishing agents are suitable.
Firefighters must wear NIOSH/MSHA approved positive pressure self-contained breathing
apparatus with full face mask and full protective clothing.
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking
surfaces with detergent and water to reduce slipping hazard. Wear proper protective equipment as
specified in the protective equipment section.
Keep container closed when not in use. Avoid inhalation of vapour or mist. Avoid contact with skin and
eyes. Use only in well-ventilated areas. Keep away from children.
Eyewash stations; Use only in well-ventilated areas.
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
Rubber gloves
Page 3/7
No
Material Safety Data Sheet
Version: 1.9
10/21/2008