RTV162-85ML MG Chemicals, RTV162-85ML Datasheet - Page 2

• Manufacturer Part Number: RTV162-85ML
• Description: ADHESIVE SEAL SIL NON-CORROSIVE
• Manufacturer: MG Chemicals
• Series: RTVr
• Type: Potting Compound, 1 Partr

Specifications of RTV162-85ML

• Product: Silicones
• Size: 2.8 oz
• Application: Bond capacitors, resistors and integrated circuits to PCBs seals exposed wires, faying surfaces, connectors
• Chemical Component: Silicone
• Color: White
• Dielectric Strength: 19.7 KV⁄mm
• Dispensing Method: Tube
• Elongation: 400%
• Hardness: 35 (Shore A)
• Primary Type: Adhesive
• Special Features: Non-Corrosive
• Specific Gravity: 1.09
• Standards: UL Recognized
• Temperature Range: -60 to +205 °C
• Temperature, Rating: -60 to +205 °C
• Tensile Strength: 3.73 MPa
• Thermal Conductivity: 0.21 W⁄m.°K
• Time, Cure: 2 Days
• Time, Setting: 4 hrs.
• Viscosity: 350 g⁄Minute
• Volume Resistivity: 3 x 10^15 Ohm.cm
• Weight: 2.8 Oz.
• Main Industry: Electronics
• For Use With/related Products: Non Corrosive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ROUTES OF EXPOSURE
3. COMPOSITION / INFORMATION ON INGREDIENTS
PRODUCT COMPOSITION
A. HAZARDOUS
Methyltrimethoxysilane
Tris(3(trimethoxysilyl)propyl)isocya
nurate
Octamethylcyclotetrasiloxane
B. NON-HAZARDOUS
dimethylpolysiloxane
Treated Silica
Polydimethylsiloxane
1,3 PROPANEDIOXYTITANIUM-
BIS-
4. FIRST AID MEASURES
INGESTION
SKIN
INHALATION
EYES
RTV162 12C-Crtrg (0.725LBS-0.329KG)
POLYDIMETHYLSILOXANE SEALANT
suspected carcinogen by NTP, IARC, or OSHA.
Eyes; Dermal
Do not induce vomiting. If victim is conscious, give 1-3 glasses of water to drink. Never give
anything by mouth to an unconscious person. Get medical attention if irritation persists.
To clean from skin, remove completely with a dry cloth or paper towel, before washing with
detergent and water. Get medical attention if irritation persists.
If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If
breathing is difficult give oxygen. Get medical attention.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention if irritation persists.
CAS REG NO.
70131-67-8
68937-51-9
63148-62-9
36497-11-7
1185-55-3
26115-70-8
556-67-2
Page 2/8
Material Safety Data Sheet
WGT. %
60 - 90 %
10 - 30 %
5 - 10 %
< 1 %
1 - 5 %
1 - 5 %
< 1 %
Version: 1.5
10/29/2007