7207SYCQE C&K Components, 7207SYCQE Datasheet - Page 29

• Manufacturer Part Number: 7207SYCQE
• Description: SWITCH TOGGLE DPDT ON-OFF MOM 5A
• Manufacturer: C&K Components
• Series: 7000r

Specifications of 7207SYCQE

• Circuit: DPDT
• Switch Function: On-Off-Mom
• Contact Rating @ Voltage: 5A @ 120VAC
• Actuator Type: Standard Round
• Actuator Length: 10.67mm
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount
• Termination Style: PC Pin
• Bushing Thread: 1/4-40
• Contact Form: DPDT
• Contact Rating: 5 Amps at 120 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Actuator: Lever, Standard
• Current Rating (max): 5 Amps
• Voltage Rating Ac: 120 Volts
• Voltage Rating Dc: 28 Volts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 7207SYCQE; CKN10183; Q4237054

F
ET Series
Sealed Subminiature Toggle Switches
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
ELECTRICAL LIFE: ETX1 models: 60,000 make-and-break cycles at
CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4
INSULATION RESISTANCE: 10 9 Ω min.
ELECTROSTATIC DISCHARGE (ESD) RESISTANT OPTION:
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
DEGREE OF PROTECTION: IP57; Protection against harmful dust
PACKAGING: Surface mount switches are shipped in tape and reel
Features/Benefits
•
•
•
•
•
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F–31 thru F–35. For additional options not shown in catalog, consult our Customer Service Center. All
models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.
Models Available
Switch Function
ET01
ET02
ET03
ET05
ET07
ET08
ET21
ET23
ET24
ET25
ET27
ET28
Sealed against solder and cleaning
process contaminants
ESD protection available
Thru-hole and surface mount models
Compact size and small footprint
save PCB space
RoHS compliant models available
20 V AC or DC max. See page F-35 for additional ratings.
full load. All other models: 30,000 cycles.
V DC, 100 mA, for both silver and gold plated contacts.
M3 & S3 insulating actuator only: 9,000 V DC min. @ sea level,
actuator to terminals. F1 conductive bushing only: Dissipates
up to 20,000 V DC from actuator to ground. M3 & S3 actuator
and F1 bushing options are not recommended for use together.
EIA RS-186E method 9 (1 hour steam aging).
deposit, full-scale voltage protection, temporary immersion.
packaging, see page F-36 for drawings and reel information.
SP, On-None-On
SPST, Off-None-On
SP, On-Off-On
SP, Mom.-Off-Mom.
SP, On-Off-Mom.
SP, On-None-Mom.
DP, On-None-On
DP, On-Off-On
DP, On-On-On
DP, Mom.-Off-Mom.
DP, On-Off-Mom.
DP, On-None-Mom.
Actuator
M
M3
S
L
S1
.240" high
Plastic, anti-static,
.240" high
.400" high
.320" high
.540" high
Bushing
D1
F1
Terminations
A
AV
C
SA
SA1
V3
AV3
V31
W
.177" High, Unthreaded
.177" high, unthreaded, ESD conductive
Right angle, PC thru-hole
Vertical right angle, PC thru-hole
PC Thru-hole
Right angle, surface mount
Right angle, surface mount rear-facing
Vertical mount, V-bracket
Vertical right angle, snap-in, PC thru-hole
Vertical mount, V-bracket, snap-in
Wire wrap
Typical Applications
•
•
•
Hand-held telecommunications
Instrumentation
Medical equipment
F–30
Materials
CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat
ACTUATOR: M3 & S3 anti-static actuator: Nylon 4/6, black standard
SWITCH SUPPORT: Brass, tin plated.
CONTACTS & TERMINALS: B contact material: Copper alloy,
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B, G, P or R contact material are RoHS compliant
and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
stabilized (UL 94V-0) or glass filled 4/6 nylon, flame retardant, heat
stabilized (UL 94V-0). F1 conductive bushing option is impregnated
with carbon fibers.
(UL 94V-0). All other actuators: Brass, chrome plated. Internal
o-ring seal standard with all actuators.
with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See F-35 for additional contact materials.
Contact Material
B
P
Q
S
G
R
Gold
Gold, matte tin
Silver
Silver/matte-tin
Gold over silver
Gold over silver,
matte-tin
Specifications and dimensions subject to change
Seal
E
Plastic Actuator Color
NONE
2
1
www.ck-components.com
Dimensions are shown: Inches (mm)
Epoxy
Black
White
No actuator color