M2113TCFW01 NKK Switches, M2113TCFW01 Datasheet - Page 2

• Manufacturer Part Number: M2113TCFW01
• Description: SWITCH TOGGLE ILLUM SPDT RED/GRN
• Manufacturer: NKK Switches
• Series: M2100r
• Type: Toggler

Specifications of M2113TCFW01

• Circuit: SPDT
• Switch Function: On-Off-On
• Contact Rating @ Voltage: 6A @ 125VAC
• Actuator Type: Standard Round
• Actuator Length: 14.70mm
• Illumination: Illuminated
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Bushing Thread: 1/4-40
• Contact Form: SPDT
• Contact Current Rating: 6 Amps at 125 Volts
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Actuator: Lever, Flat
• Illumination Color: Red, Green
• Contact Rating: 6 Amps at 125 Volts
• Current, Rating: 6/3 AAC/ADC
• Dielectric Strength: 1500 VAC
• Mounting Hole Size: 0.102 "
• Number Of Poles: 1
• Number Of Positions: 3
• Operation: On-Off-On
• Special Features: Illuminated
• Termination: Solder
• Voltage, Rating: 250/30 VAC/VDC
• Pole Throw Configuration: SPDT
• Switch Configuration: ON OFF ON
• Actuator Style: Toggle
• Current Rating (max): 6A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 30VVDC
• Contact Material: Silver Alloy
• Housing Material: Diallyl Phthalate/Stainless Steel
• Mechanical Life: 50000
• Product Height (mm): 43mm
• Product Depth (mm): 12.7mm
• Operating Temperature Min Deg. C: -10C
• Product Length (mm): 13mm
• Operating Temperature Max Deg. C: 55C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 360-2314; M2113TCFW01; M2113TCFW01-RO; M2113TCFW01-RO

General Specifications
NKK Switches
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Soldering Time & Temp:
Power Level (code W):
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mounting Bracket:
Mounting Torque:
Switch Terminals:
Lamp Terminals:
Mechanical Life:
Angle of Throw:
UL Recognized:
Lamp Contacts:
CSA Certified:
Electrical Life:
Vibration:
Humidity:
Cleaning:
Housing:
Bushing:
Shock:
Base:
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum
Toggles & Paddles
Rockers
20°
Brass with nickel plating
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F) for toggles & rockers
–25°C through +70°C (–13°F through +158°F) for paddles
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
1.47Nm (13 lb
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
Single pole toggles & rockers with synchronous circuits & solder lug or PC recognized at 6A @
125V AC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
All single pole toggles & rockers with synchronous circuits certified at 6A @ 125V AC; CSA
File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
•
in) for double nut; .67Nm (6 lb
LED Tipped Actuators
Double Pole
Double Pole
Single Pole
Single Pole
On-to-On Position
•
in) for single nut
13.73N
3.19N
4.41N
6.37N
Series M2100
Off-to-On Position
17.65N
3.92N
7.06N
9.80N
7