B3W-9000-RG2C Omron, B3W-9000-RG2C Datasheet - Page 8

• Manufacturer Part Number: B3W-9000-RG2C
• Description: SWITCH TACT ILLM SPST-NO RED/GRN
• Manufacturer: Omron
• Series: B3W-9r

Specifications of B3W-9000-RG2C

• Circuit: SPST-NO
• Switch Function: Off-Mom
• Contact Rating @ Voltage: 0.05A @ 24VDC
• Actuator Type: Square Button
• Mounting Type: Through Hole
• Orientation: Vertical
• Outline: 10.00mm x 10.00mm
• Illumination: Illuminated
• Operating Force: 160gf
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: B3W9000RG2C

Removing the Cap - Text Film Installation
Placing the Cap on the Switch
Hold the Cap at the side away from the mating section. Push straight
down until the mating section meets.
Removing the Cap
The Cap can be removed up to two times. Excessively removing the
Cap will cause the mating section to become weak, resulting the
operating section not mating completely or the Cap may fall off.
Film Dimensions
Dimensions of the film are shown below. The thickness is 0.2 mm.
264
1. Hold the cap at the side away from the mating section. Pull
2. Do not remove the cap while the Switch is mounted. Doing so
straight up.
will apply force to the soldered section and LEDs, resulting in
malfunction.
Illuminated Tactile Switches
Correct
Correct
7.4±0.1
7.4±0.1
Incorrect
Incorrect
8.9±0.1
8.9±0.1
B3W-9
Dust Protection
Although the switching mechanism is a sealed structure (IP64), illu-
mination part and actuation part is not sealed. Ensure you have the
correct environmental conditions for installation. Use a protective
sheet or take other measures to protect against dust.
Sensitivity to Static Electricity
Switches with high-brightness green (HG) or blue (B) LEDs are sus-
ceptible to static electricity. Take care when handling switches with
these LEDs as the LEDs may be damaged.
Storage Precautions
Storage Environment
To prevent degradation, such as discoloration, of the terminals during
storage, do not store the Switch in locations that are subject to the
following conditions.
Storage condition
Store the Switches in the packaging box.
After the packaging box is opened, use the contents as quickly as
possible. When storing leftover parts, make sure that appropriate
measures are taken against humidity and corrosive gases.
Agreement of Product Use
Comply with the usage, storage, and disposal conditions specified by
OMRON as outlined in the precautions in the product datasheet and
specifications.
Be sure to read the precautions common to all Tactile Switches, con-
tained in the Technical User’s Guide, “Tactile Switches, Technical
Information” for correct use
1. High temperature or humidity
2. Corrosive gases
3. Direct sunlight