D4BS-35FS Omron, D4BS-35FS Datasheet - Page 3

• Manufacturer Part Number: D4BS-35FS
• Description: SWITCH SAFETY DOOR 10A SEALED
• Manufacturer: Omron
• Series: D4BSr
• Type: Safety-Door Switchr

Specifications of D4BS-35FS

• Circuit: DPST (1-NO, 1-NC)
• Switch Function: On-Off, Off-On
• Contact Rating @ Voltage: 10A @ 250VAC
• Actuator Type: Panel Disconnect
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Operating Force: 1960gf
• Contact Form: DPDT
• Contact Rating: 10 Amps
• Actuator: Plunger
• Contact Configuration: DPST-1NO / 1NC
• Contact Voltage Ac Max: 600V
• Contact Current Ac Max: 10A
• Switch Operation: ON
• Switch Terminals: Screw
• Contact Current Max: 10A
• Circuitry: DPST-1NO/1NC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: na, Lead free / RoHS Compliant
• Other names: D4BS35FS; Z2434

■ Characteristics
Note: 1. The above values are initial values.
Connections
■ Contact Form (Diagrams Show State with Key Inserted)
Note: The terminal numbers are in accordance with EN50013, and the contact symbols are in accordance with IEC60947-5-1.
Degree of protection (see note 2)
Durability (see note 3)
Operating speed
Operating frequency
Rated frequency
Contact gap
Direct opening force (see note 4)
Direct opening travel (see note 4)
Full stroke
Insulation resistance
Contact resistance
Rated insulation voltage (U
Conventional enclosed thermal current
(I
Dielectric strength (U
Switching overvoltage
Conditional short-circuit current
Pollution degree
(operating environment)
Insulation class
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Weight
D4BS-@5@S
D4BS-@A@S
the
)
2. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are
3. The durability is for an ambient temperature of 5 C to 35 C and an ambient humidity of 40% to 70%. Contact your OMRON sales
4. These figures are minimum requirements for safe operation.
Model
sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust, oil, or water
penetration, do not use the D4BS in places where dust, oil, water, or chemicals may enter through the key hole on the head, otherwise
Switch damage or malfunctioning may occur.
representative for more detailed information on other operating environments.
1NC/1NO
2NC
imp
)
i
)
Contact form
11
21
Zb
Zb
IP67 (EN60947-5-1) (This applies for the Switch only. The degree of protection for the key hole is
IP00.)
Mechanical: 1,000,000 operations min.
Electrical:
0.1 m/s to 0.5 m/s
30 operations/min max.
50/60 Hz
2 x 2 mm min.
19.61 N min. (EN60947-5-1)
20 mm min. (EN60947-5-1)
23 mm min.
100 M min. (at 500 VDC) between terminals of same or different polarity, between each terminal and
ground, and between each terminal and non-current-carrying metal part
25 m
600 V (EN60947-5-1)
20 A (EN60947-5-1)
Impulse dielectric strength (U
between current-carrying metal parts and ground, and between each terminal and non-current-
carrying metal part
1,500 V max. (EN60947-5-1)
100 A (EN60947-5-1)
3 (EN60947-5-1)
Class I (with ground terminal)
Malfunction: 10 to 500 Hz, 0.65-mm single amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
Operating:
Operating:
Approx. 285 g (in the case of D4BS-15FS)
max. (initial value)
12
22
12
24
500,000 operations min. (10 A at 250 VAC, resistive load)
95% max.
40 C to 80 C (with no icing)
2
min. (IEC68-2-27)
2
11 - 12
23 - 24
11 - 12
21 - 22
min. (IEC68-2-27)
Operation Key
insertion com-
pletion position
Operation Key
insertion com-
pletion position
imp
) 4 kV (EN60947-5-1) between terminals of same or different polarity,
Operating pattern
Stroke
Stroke
Extraction
completion
position
Extraction
completion
position
Safety-door Switch
ON
ON
Only NC contact 11-12
has an approved direct
opening mechanism.
Terminals 11-12 and
23-24 can be used as
unlike poles.
NC contacts 11-12 and
21-22 have an
approved direct
opening mechanism.
Terminals 11-12 and
21-22 can be used as
unlike poles.
D4BS
Remarks
A-29