D2F-01 Omron, D2F-01 Datasheet - Page 7

• Manufacturer Part Number: D2F-01
• Description: BUTTON SWITCH PCB SPDT .1A 150GF
• Manufacturer: Omron
• Series: D2Fr
• Type: Snap Actionr

Specifications of D2F-01

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 0.1A @ 30VDC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Operating Force: 150gf
• Contact Form: SPDT
• Contact Rating: 0.1 Amp
• Actuator: Plunger, Pin
• Microswitch Type: Ultra Subminiature
• Actuator Style: Pin Plunger
• Operating Force Max: 150gf
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 100mA
• Body Style: Ultra Subminiature
• Brand/series: D2F-01 Series
• Current, Rating: 0.1 A
• Dielectric Strength: 1500 VAC
• Force, Operating: 150 g
• Mounting Hole Size: 1.2 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL Listed, CSA Certified, RoHS Compliant
• Temperature Rating: -25 to +65 °C
• Termination: Through Hole
• Voltage, Rating: 30 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2F01; SW501

Precautions
■ Mounting
Mount the D2F switch onto the PC board as shown in the following
diagram, using 2-pitch (2 x 2.54 mm) terminal spacing.
■ PC Board Machining
■ Dimensions
The use of molded components is recommended for mounting pur-
poses.
■ Molded Pin Mounting Diagram
When screw mounting, use M2 screws together with washers. Fas-
ten the screws applying 0.8 to 1 kg-cm tightening torque.
6
Snap Action Switch
D2F
■ Mounting Hole Machining
■ Dimensions
When soldering, use 6:4 solder and a 60 W soldering iron, and com-
plete soldering within 3 seconds. After soldering, do not apply exter-
nal force to the soldered area for about 1 minute.
Allow sufficient insulation distance between terminals and between
terminals and ground.