MS22AFG01 NKK Switches, MS22AFG01 Datasheet - Page 2

• Manufacturer Part Number: MS22AFG01
• Description: SW SLIDE DPDT 0.4VA GOLD SLD LUG
• Manufacturer: NKK Switches
• Series: MSr
• Type: Slider

Specifications of MS22AFG01

• Circuit: DPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 0.4VA @ 28VAC/DC
• Actuator Type: Standard
• Mounting Type: Panel Mount
• Orientation: Vertical
• Termination Style: Solder Lug
• Contact Form: DPDT
• Contact Rating: 0.4 Volt-Amp at 28 VoltsAC/DC
• Mounting Style: Panel
• Illumination: Not Illuminated
• Travel: 2.2 mm
• Body Style: Miniature
• Brand/series: MS Series
• Current, Rating: 0.1 A
• Dielectric Strength: 1500 VAC
• Dimension, Actuator: 0.323 in. W
• Dimension, Body: 0.772 in. L x 0.299 in. W x 0.449 in. H
• Electrical Life: 50000 Operations (Min.)
• Material, Body: Glass Fibre Reinforced Diallyl Phthalate Case, Glass Fibre Reinforced Polyster Actuator
• Material, Contact: Gold
• Mechanical Life: 100000 Operations (Min.)
• Mounting Hole Size: 0.94 "
• Number Of Poles: 2
• Number Of Positions: 2
• Operation: On-None-On
• Resistance, Contact: 20 Milliohms (Max.)
• Resistance, Insulation: 1000 Megohms (Min.) @ 500 VDC
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -30 °C
• Termination: Solder
• Voltage, Rating: 28 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

General Specifications
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Processing
Standards & Certifications
R
Logic/Power Level (code A):
Flammability Standards:
Operating Temp Range:
Power Level (code W):
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
C-UL Recognized:
Mechanical Life:
Contact Timing:
UL Recognized:
CSA Certified:
Electrical Life:
Total Travel:
Dust Cover:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Actuator:
Frame:
Shock:
Case:
6A @ 125V AC or 3A @ 250V AC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum
25,000 operations minimum for silver; 50,000 operations minimum for gold
Nonshorting (break-before-make)
On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm)
Glass fiber reinforced polyester
Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount
Phosphor bronze with nickel plating
Glass fiber reinforced diallyl phthalate resin (UL94V-0)
Silver alloy (code W); copper with gold plating (code G);
or silver alloy with gold plating (code A)
Silver capped copper with silver plating (code W); copper with gold plating (code G);
or silver alloy with gold plating (code A)
Copper or brass with silver or gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering recommended (PC Mount). See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
These devices are not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 rated case
All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC;
UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All Double Throw & 3 Throw models certified at 6A @ 125V AC, 3A @ 250V AC, &
0.4VA maximum @ 28V DC; CSA File No. 023535-0-000; add “/C” to end of part number
to order CSA mark on switch.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Miniature Slides
Series MS
03-07