M2032TNW01-DA NKK Switches, M2032TNW01-DA Datasheet - Page 7

• Manufacturer Part Number: M2032TNW01-DA
• Description: SW ROCKER 3PDT BK SILV SLD LUG
• Manufacturer: NKK Switches
• Series: Mr

Specifications of M2032TNW01-DA

• Circuit: 3PDT
• Switch Function: On-On
• Contact Rating @ Voltage: 6A @ 125VAC
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount, Flange
• Termination Style: Solder Lug
• Panel Cutout Dimensions: 17.80mm x 10.10mm
• Pole Throw Configuration: 3PDT
• Switch Configuration: ON None ON
• Actuator Style: Small Rocker
• Actuator Material: Polyamide
• Current Rating (max): 6A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 30VVDC
• Mechanical Life: 50000
• Contact Material: Silver Alloy
• Contact Plating: Silver
• Product Height (mm): 29.2mm
• Product Depth (mm): 17.5mm
• Product Length (mm): 29.5mm
• Operating Temp Range: -30C to 85C
• Mounting Style: Panel
• Terminal Type: Solder Lug
• Contact Form: 3PDT
• Contact Rating: 6 Amps at 125 Volts
• Actuator: Rocker
• Terminal Seal: Epoxy
• Voltage Rating Ac: 125 Volts, 250 Volts
• Voltage Rating Dc: 30 Volts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Compliant

B
General
Series M2100
B92
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
Soldering Time & Temp:
Insulation Resistance:
Stationary Contacts:
Power Level (silver):
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mounting Bracket:
Logic Level (gold):
Switch Terminals:
Mechanical Life:
Angle of Throw:
Lamp Terminals:
Lamp Contacts:
Electrical Life:
Vibration:
Humidity:
Cleaning:
Housing:
Shock:
Base:
CSA:
UL:
Specifications
6A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
10 milliohms maximum for silver; 20 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
50,000 operations minimum
25,000 operations minimum
Paddles
Rockers
20°
Stainless steel
Steel with tin plating
Silver alloy or silver alloy with gold plating
Silver with silver plating or copper or brass with gold plating
Phosphor bronze
Diallyl phthalate (UL94V-0)
Copper with silver or gold plating
Brass with silver or gold plating
–10°C through +55°C (+14°F through +131°F) for rockers
–25°C through +70°C (–13°F through +158°F) for paddles
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering (PC version): See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Note: Lever must be in center position while soldering.
PC mountable device is not process sealed. Hand clean locally using alcohol based solution.
UL94V-0 base
File No. E44145
Single pole rockers with synchronous circuits & solder lug or PC recognized at 6A @ 125V AC.
Add “/U” to end of part number to order UL mark on switch.
File No. 023535_0_000
All single pole rockers with synchronous circuits certified at 6A @ 125V AC.
Add “/C” to end of part number to order CSA mark on switch.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
www.nkk.com
Double Pole
Double Pole
Single Pole
Single Pole
On-to-On Position
LED Tipped Rockers & Paddles
13.73N
3.19N
4.41N
6.37N
Off-to-On Position
17.65N
3.92N
7.06N
9.80N