YB215CWCKW01-5D-JB NKK Switches, YB215CWCKW01-5D-JB Datasheet - Page 9

• Manufacturer Part Number: YB215CWCKW01-5D-JB
• Description: PB SW SPDT NO AMBER SOLDER LUG
• Manufacturer: NKK Switches
• Series: YB2r
• Type: Illuminatedr

Specifications of YB215CWCKW01-5D-JB

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Flush Round Button
• Illumination Type, Color: LED, Amber
• Illumination Voltage (nominal): 2 VDC
• Mounting Type: Panel Mount
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: YB215CWCKW01/CUL-5D-JB; YB215CWCKW01/CUL-5D-JB

www.nikkaiswitches.com • Nihon Kaiheiki • Phone [phone] • Fax [phone]
1. Remove mounting nut.
2. Remove flange and
3. Install LED.
AT634, AT636
AT628
AT625
4. Align tabs (B) on both
（＋）
red o-ring from
housing. There are
two o-rings in this
assembly: one is
red, one is orange.
sides of actuator with
the projections (A) in-
side of the housing and
push actuator firmly
down to snap in.
（＋）
（＋）
（­）
（­）
（­）
Knurled Mounting Nut
D-flat
D-flat
The larger metal part within the LED
represents the cathode (–). Align LED
for appropriate polarity and insert LED
into base.
Align D-flat on LED with PN on switch
for appropriate polarity and insert LED
into base.
Align D-flat on LED with PN on switch
for appropriate polarity and insert LED
into base.
Anode Socket (+)
PN This Side
B
Cathode (–)
Bezel
A
ASSEMBLY INSTRUCTIONS
Housing
Actuator
Sensitive Devices
Sensitive Devices
Attention
Attention
Electrostatic
Electrostatic
Cathode Socket (–)
Flush Panel Seal Pushbuttons
Anode (+)
Red O-ring
5. Install the red o-ring
6. Align tab inside of the bezel with keyway on housing
7. Before installing into panel,
8. Attach mounting nut behind panel and tighten. Make
which was removed
in step 2 at the inside
bottom of the bezel.
and bring bezel back into its originial position.
make sure that the orange
o-ring is present at the back
of the bezel. Align keyway
on bezel with tab in panel
and push switch all the way
into the panel.
sure that bezel and actuator fit properly and that there is
no space between bezel and panel. Do not overtighten.
Mounting torque: 0.785Nm (6.95 lb
Optional socket wrench AT106 available.
Housing
Red O-ring
AT106 Optional Socket Wrench
Keyway
Bezel
Actuator
Knurled Mounting Nut
Tab
Series YB2
Back of
Bezel
•
in) maximum.
Bezel
Orange O-ring
Red O-ring
Bezel
Panel
Panel
Keyway
Bezel
Tab
9