LB26CKW01-12-CJ NKK Switches, LB26CKW01-12-CJ Datasheet - Page 2

• Manufacturer Part Number: LB26CKW01-12-CJ
• Description: SW PB ILLUM DPDT ALT RND RED SLD
• Manufacturer: NKK Switches
• Series: LBr
• Type: Illuminatedr

Specifications of LB26CKW01-12-CJ

• Circuit: DPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Round Button
• Illumination Type, Color: Incandescent, Red
• Illumination Voltage (nominal): 12 VAC
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Pole Throw Configuration: DPDT
• Switch Configuration: ON ON
• Actuator Style: Round Button
• Current Rating (max): 3A
• Illumination Type: Incandescent Lamp
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 30VVDC
• Contact Material: Silver Alloy
• Contact Plating: Silver
• Housing Material: Liquid Crystal Polymer/(Glass Fiber/Polyamide)
• Mechanical Life: 200000
• Product Height (mm): 34mm
• Product Depth (mm): 23.7mm
• Product Length (mm): 23.7mm
• Operating Temp Range: -25C to 50C
• Mounting Style: Panel
• Terminal Type: Quick Connect/Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: LB26CKW01-12-CJ-RO; LB26CKW01-12-CJ-RO

General Specifications
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] • www.nkkswitches.com
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Standards & Certifications
R
Soldering Time & Temperature:
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
UL & C-UL Recognized:
Cap Installation Force:
Insulation Resistance:
Quick Connect Force:
Stationary Contacts:
Power Level (silver):
Contact Resistance:
Dielectric Strength:
Logic Level (gold):
Movable Contact:
Switch Terminals:
Lamp Terminals:
Mechanical Life:
Contact Timing:
Snap-in Frame:
CSA Certified:
Electrical Life:
Vibration:
Humidity:
Housing:
Sealing:
Shock:
Travel:
Base:
3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum for silver; 100 milliohms maximum for gold
200 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
1,000,000 operations minimum for momentary circuit
200,000 operations minimum for maintained circuit
100,000 operations minimum
4.41N
Nonshorting (break-before-make)
Momentary: Pretravel .059” (1.5mm); Overtravel .059” (1.5mm); Total Travel .118” (3.0mm)
Maintained: Pretravel .087” (2.2mm); Overtravel .031” (0.8mm); Total Travel .118” (3.0mm)
Glass fiber reinforced polyamide (UL94V-0)
Stainless steel
Silver alloy or copper with gold plating
Silver alloy or copper with gold plating
Liquid crystal polymer (UL94V-0)
Phosphor bronze with silver or gold plating
Brass with silver plating
–25°C through +50°C (–13°F through +122°F)
Note: When used with a polyvinyl chloride splash cover, the lowest limit is 0°C (32°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Not available for snap-in; see next section for panel seal.
3.92N maximum downward force on cap
52.95N maximum downward force on connector
Manual Soldering: See Profile A in Supplement section.
UL94V-0 housing & base
All models recognized at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch.
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All models certified at 3A @ 125V or 250V AC or 0.4VA @ 28V AC/DC maximum;
CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch.
Standard Size Snap-in Pushbuttons
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Series LB
03-07