A22L-TA-12A-11A Omron, A22L-TA-12A-11A Datasheet - Page 28
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
A22L-TA-12A-11A
Manufacturer Part Number
A22L-TA-12A-11A
Description
SWITCH PB ILLUM RND ALT SPST BLU
Manufacturer
Omron
Series
A22r
Type
Illuminatedr
Datasheet
1.A22-FA.pdf
(36 pages)
Specifications of A22L-TA-12A-11A
Circuit
DPST (1-NO, 1-NC)
Switch Function
On-Off, Off-On
Contact Rating @ Voltage
10A @ 110VAC
Actuator Type
Round Button
Illumination Type, Color
LED, Blue
Illumination Voltage (nominal)
12 VAC/DC
Mounting Type
Panel Mount
Termination Style
Screw Terminal
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
A22LTA12A11A
Affixing Character Film
Mounting and Dismounting Snap-in Legend
Hold the Cap, remove the cardboard on the Film, and attach the
Film to the Cap. Make sure that the protruding portions of the Cap
engage he cutout portions of the Film and that the characters are
aligned parallel to the imaginary line connecting the two protruding
portions to the left and right of the Cap.
Press and secure the Snap-in Legend Plate onto the Legend Plate
Frame.
The direction of the characters will vary with the mounting direction
of the control panel if the Switch is a knob or key selector model.
To easily remove the Snap-in Legend Plate from the Legend Plate
Frame mounted to the panel, insert a Tool with a thin tip into the
space between the Snap-in Legend Plate and the Legend Plate
Frame.
Concave surface
Protruding portions on Cap
http://www.ia.omron.com/
Legend Plate Frame
Snap-in Legend Plate
Remove the
cardboard.
Engraving Method
Material: Acrylic
Mounting Three-throw Spacer
Press and secure the two protruding portions of the Three-throw
Spacer to the two indented portions of the inner side of the control
panel.
The Snap-in Legend Plate is easily removed by pressing the Snap-
in Legend Plate from the back of the Legend Plate Frame.
The Legend Plate Frame is made of acrylic resin, which is easily
damaged by shock. Be sure to handle the Legend Plate Frame with
care.
Engrave the characters directly on the matted side of the Snap-in
Legend Plate.
The characters must be engraved no deeper than 0.5 mm.
Apply alcohol-based paint coating to the engraved characters.
If the Snap-in Legend Plate is transparent, engrave the mirror-
written characters on the back of the Snap-in Legend Plate and
apply paint coating to the characters. Then apply paint coating of a
different color to the remaining part of the Snap-in Legend Plate.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
A22
28