RI-29AA Coto Technology, RI-29AA Datasheet - Page 2

• Manufacturer Part Number: RI-29AA
• Description: SWITCH MAGNETIC 1A 16-25AT
• Manufacturer: Coto Technology
• Series: RI-29r
• Type: Glass Bodyr

Specifications of RI-29AA

• Circuit: SPST-NO
• Must Operate: 16 ~ 25AT
• Must Release: 5 ~ 18AT
• Switching Current (dc) (max): 1A
• Switching Voltage (dc) (max): 200V
• Switching Power (max): 15W
• Magnet: Not Specified
• Mounting Type: Non-Standard (Axial)
• Termination Style: Axial (2 Leads)
• Switch Type: Dry-Reed
• Contact Form: SPST - NO
• Contact Rating: 1000 mAmps
• Magnet Type: Electromagnet
• Operate Range: 16 At to 25 At
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 306-1083; RI29AA

Shock
The switches are tested in accordance with “IEC 68-
2-27”, test Ea (peak acceleration 150 G, half
sinewave; duration 11 ms). Such a shock will not
cause an open switch (no magnetic field present) to
close, nor a switch kept closed by an 80 AT coil to
open.
Vibration
The switches are tested in accordance with “IEC 68-
2-6”, test Fc (acceleration 10 G; below cross-over
frequency 57 to 62 Hz; amplitude 0.75 mm; fre-
quency range 10 to 2000 Hz, duration 90 minutes in
each direction). Such a vibration will not cause an
open switch (no magnetic field present) to close, nor
a switch kept closed by an 80 AT coil to open.
Mechanical Strength
The robustness of the terminations is tested in
accordance with “IEC 68-2-21”, test Ua
Operating and Storage Temperature
Operating ambient temperature; min: -55°C; max:
+75°C. Storage temperature; min: -55°C; max:
+125°C.
RI-29 Series Dry Reed Switch
For Most Recent Data, Consult the Coto Technology Website:
Note:
Temperature excursions up to 150°C
1
(load 10 N).
may be permissible. For more information contact
your nearest Coto Technology sales office.
Soldering
The switch can withstand soldering heat in accordance
with “IEC 68-2-20”, test Tb, method 1B: solder bath
at 350 ±10°C for 3.5 ±0.5 s. Solderability is tested in
accordance with “IEC 68-2-20”, test Ta, method 3:
solder globule temperature 235°C; ageing 1b: 4 hours
steam.
Welding
The leads can be welded.
Mounting
The leads should not be bent closer than 1 mm to the
glass-to-metal seals. Stress on the seals should be
avoided. Care must be taken to prevent stray magnetic
fields from influencing the operating and measuring
conditions.
www.cotorelay.com
6
E-mail: [e-mail]
107