BP05YT C&K Components, BP05YT Datasheet - Page 3

• Manufacturer Part Number: BP05YT
• Description: SWITCH DIP SIDE-ACT SEALED 5POS
• Manufacturer: C&K Components
• Series: BPr

Specifications of BP05YT

• Circuit: SPST
• Number Of Positions: 5
• Contact Rating @ Voltage: 0.1A @ 5VDC
• Actuator Type: Standard
• Actuator Level: Raised
• Mounting Type: Through Hole
• Orientation: Side Actuated
• Washable: Yes
• Switch Type: DIP
• Actuator: Side
• Terminal Pitch: 2.54 mm
• Contact Form: SPST
• Termination Style: PCB
• Contact Rating: 100 mA
• Operating Temperature Range: - 20 C to + 60 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: *BP05YT; CKN3024

HOW TO ORDER
All available BP SERIES SIDE ACTUATED DIP SWITCH options are listed on page D-5, and are described on pages D-6. When
selecting options and building a part number, some ordering format boxes may not be filled. Dashes, hyphens or spaces in the part
number are not significant and are shown for clarity only.
SPECIFICATIONS
SWITCH FUNCTION: SPST - 1, 2, 3, 4, 5, 6, 7, 8, 10 & 12
CONTACT RATING:
MECHANICAL & ELECTRICAL LIFE: 2,000 make-and-break cycles
CONTACT RESISTANCE: Below 50 milliohms typ. initial @
INSULATION RESISTANCE: 10
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between
STORAGE & OPERATING TEMPERATURE: - 20
SOLDERABILITY: Per MIL-STD-202F method 208D, or
PACKAGING: Switches supplied in rigid dispensing tubes in full-tube
NOTE: Specifications and materials listed above are general specifications for switches with standard options. For information on specific and custom switches, consult factory.
positions available.
Carry: 100 mA max. @ 50 V DC.
Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC.
each circuit, models with gold contacts (K contact material).
1,000 cycles, models with tin contacts (Y contact material).
2– 4 V DC, 100 mA.
adjacent terminals.
EIA RS-186E method 9 (1 hour steam aging).
quantities only; this may affect order quantity. Number of switches
per tube varies with model, consult factory. Switch position 1
denotes pin no. 1. All switch actuators in ‘OFF’ position standard.
COMPONENTS, INC. 57 Stanley Avenue, Watertown, MA 02172
BP Series
9
ohms min.
_
C to 60
_
C.
MATERIALS
CASE: Glass filled polyester (PET), flame retardant (UL 94V-0).
COVER: Anodized aluminum.
ACTUATOR: Glass filled polyester (PET), flame retardant, (UL 94V-0).
CONTACTS: Gold over nickel over phosphor bronze (K contact material)
TERMINALS: Phosphor bronze, tin plated.
TERMINAL SEAL: Epoxy.
TAPE SEAL: Metalized polyester.
or phosphor bronze, tin plated (Y contact material).
Tel: [phone]
Side Actuated DIP Switches
Fax: [phone]
Sales: [phone]
D-7
D