A0210X APEM Components, A0210X Datasheet - Page 13

• Manufacturer Part Number: A0210X
• Description: 22MM IND CTRL PB OPERATOR
• Manufacturer: APEM Components
• Series: A02r
• Type: Pushbutton Switchesr

Specifications of A0210X

• Contact Rating: 16 Amps at 250 Volts
• Actuator: Button, Round
• Mounting Style: Panel
• Terminal Seal: Sealed
• Contact Plating: Nickel
• Contact Material: Silver
• Illumination: Illuminated
• Body Length: 45.5 mm
• Body Shape: Rectangular
• Current Rating (max): 16 Amps
• Dielectric Strength: 2000 Volts
• Features: To order these elements, select desired model numbers
• Insulation Resistance: 50 MOhms
• Led Supply Voltage: 380 Volts
• Mounting Angle: Straight
• Voltage Rating Ac: 380 Volts
• Water / Moisture Rating: IP65
• Switch Function: Maintained
• Termination Style: Quick Connect
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

APEM
PANEL MOUNTING ASSEMBLY
• Drill/punch hole shaped as above.
• Assemble front operator through hole, fit fixing nut and
tighten to a maximum torque of 0,8Nm using tool
No 30-0001.
• Wire chosen switch block as required and slide onto
operator until latch engages.
• Fit bulb if required using tool No 30-0002.
• Snap screen onto reflector assembly with legend in
between if required and snap onto front operator TAKING
CARE TO LINE UP THE LOCATING SLOT WITH THE
POLARISING DOT, and not to damage the seal.
EMERGENCY
STOP
FIXING NUT KEY
30-0001
LEVER SWITCHES
ROTARY
Modular construction / panel mounting
SWITCHES
KEYLOCK
A1-A01 series
PUSHBUTTONS
& INDICATORS
www.apem.com
BULB REMOVER
30-0002
TO REMOVE BULB
Remove reflector/screen assembly. Use the bulb extractor
30-0002 to remove the bulb.
SWITCH BLOCK
To assemble switch block to front operator, TAKE CARE
TO LINE UP SWITCH BLOCK WITH FRONT OPERATOR.
Once in position, slide on to front operator. NB. : Ensure
latch is fully engaged correctly onto the switch block.
To remove switch block, depress the latch and slide the
switch block off the operator.
LEGEND
LATCH
SWITCH BLOCK
SCREEN
REFLECTOR
LOCATING
SLOT
BULB
POLARISING
DOT
PANEL
SEAL
FIXING
NUT
OPERATOR
Round & square operators only
Rectangular operators only
Max. panel thickness : 8 mm (.315)
(.629 DIA
Ø16.00
Industrial controls
PANEL CUT
Installation - tools
0.00/+0.30
.000/+.011
)
(.059)
(.629 DIA
1.50
Ø16.00
-
OUT
(.413)
10.50
(.078 DIA)
0.00/+0.30
.000/+.011
Ø2.00
)
G-15
G