A01ES APEM Components, A01ES Datasheet - Page 14

• Manufacturer Part Number: A01ES
• Description: SWITCH OPERATOR 24MM EMERGENCY
• Manufacturer: APEM Components
• Type: Maintainedr
• Series: A01r

Specifications of A01ES

• Illumination: Non-Illuminated
• (select First, Then Apply Filters) Compatible Series: Apem, A01 (1 or 2 Pole)
• Actuator Type: E-Stop, Round
• Panel Cutout Dimensions: 16mm (Round)
• Requires: Contact Block
• Contact Rating: 1.5 Amps
• Actuator: Button, Mushroom Head
• Mounting Style: Panel
• Terminal Seal: Sealed
• Contact Plating: Gold
• Contact Material: Silver
• Body Length: 42 mm
• Body Shape: Round
• Current Rating (max): 1.5 Amps
• Dielectric Strength: 2900 Volts
• Features: Various coloured mushroom actuators are available.
• Insulation Resistance: 50 MOhms
• Mounting Angle: Straight
• Operating Force: 16 N
• Voltage Rating Ac: 250 Volts
• Water / Moisture Rating: IP65
• Termination Style: Solder
• Leaded Process Compatible: Yes
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 679-1358

G
G-24
PANEL MOUNTING ASSEMBLY
• Drill/punch hole in panel as shaped above.
• Assemble front operator through hole and :
b/ Rectangular types : tighten two panel fixing screws in
• Wire chosen switch block as required and snap onto
front operator.
• Snap end cap onto switch block.
• Fit bulb if required using tool No 30-0002.
• Snap screen onto reflector assembly with legend in
between if required ans snap into front operator TAKING
CARE TO LINE UP THE LOCATING SLOT WITH THE
POLARISING DOT, and not to damage the seal.
a/ Round & square types : tighten nut to a maximum
EMERGENCY
STOP
torque of 0,8Nm using tool No 30-0001. Snap on
adaptor block
front to a maximum torque of 6cNm.
A02 series
Industrial controls
Installation
LEVERS SWITCHES
ROTARY
SWITCHES
KEYLOCK
Modular construction / panel mounting
www.apem.com
PUSHBUTTONS & INDICATORS
PANEL CLAMP
FIXING SCREW
TO REMOVE BULB
Remove reflector/screen assembly. Use the bulb extractor
30-0002 to remove the bulb.
TO REMOVE SWITCH BLOCK
Lever out latches using small screwdriver taking care not to
overbend, and pull off the block from the front operator.
A02 Accessories
End cap terminal guard offering unique terminal protection.
6.35 mm push on tab terminals.
Specify “SP” to the end of the switchblock and operator P/N.
Example : A02503SP.
SCREEN
LEGEND
REFLECTOR
LOCATING
SLOT
BULB
POLARISING
DOT
FIXING
NUT
OPERATOR
ADAPTOR BLOCK
SWITCH BLOCK
END CAP
PANEL
SEAL
Round & square operators
Rectangular operators
Max. panel thickness : 8 mm (.315)
(.866 DIA
Ø22.00
Part No : 14-0005
PANEL CUT
0.00/+0.50
.000/+.019
)
-
29.50
OUT
(1.161
(.511)
13.00
0.00/+0.50
.000/+.019
APEM
)