A0109Y APEM Components, A0109Y Datasheet - Page 13

• Manufacturer Part Number: A0109Y
• Description: SWITCH OPERATOR ROUN 1 OR 2 POLE
• Manufacturer: APEM Components
• Type: Momentaryr

Specifications of A0109Y

• (select First, Then Apply Filters) Compatible Series: Apem, A01 (1 or 2 Pole)
• Actuator Type: Pushbutton, Round
• Illumination: Illuminated
• Panel Cutout Dimensions: 16mm (Round)
• Requires: Contact Block, Lens, Illumination Source
• Mounting Hole Dia: 16mm
• Svhc: No SVHC (15-Dec-2010)
• Approval Bodies: BEAB, CSA, VDE, UL
• External Depth: 42mm
• External Diameter: 18mm
• Ip/nema Rating: IP65
• Insulation Resistance: 50Mohm
• No. Of: RoHS Compliant
• Current Rating (max): 6 Amps
• Voltage Rating Ac: 250 Volts
• Voltage Rating Dc: 12 Volts
• For Use With: AO1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 679-1316

APEM
PANEL MOUNTING ASSEMBLY
• Drill/punch hole shaped as above.
• Assemble front operator through hole, fit fixing nut and
tighten to a maximum torque of 0,8Nm using tool
No 30-0001.
• Wire chosen switch block as required and slide onto
operator until latch engages.
• Fit bulb if required using tool No 30-0002.
• Snap screen onto reflector assembly with legend in
between if required and snap onto front operator TAKING
CARE TO LINE UP THE LOCATING SLOT WITH THE
POLARISING DOT, and not to damage the seal.
EMERGENCY
STOP
FIXING NUT KEY
30-0001
LEVER SWITCHES
ROTARY
Modular construction / panel mounting
SWITCHES
KEYLOCK
A1-A01 series
PUSHBUTTONS
& INDICATORS
www.apem.com
BULB REMOVER
30-0002
TO REMOVE BULB
Remove reflector/screen assembly. Use the bulb extractor
30-0002 to remove the bulb.
SWITCH BLOCK
To assemble switch block to front operator, TAKE CARE
TO LINE UP SWITCH BLOCK WITH FRONT OPERATOR.
Once in position, slide on to front operator. NB. : Ensure
latch is fully engaged correctly onto the switch block.
To remove switch block, depress the latch and slide the
switch block off the operator.
SCREEN
LEGEND
LATCH
SWITCH BLOCK
REFLECTOR
LOCATING
SLOT
BULB
POLARISING
DOT
PANEL
SEAL
FIXING
NUT
OPERATOR
Round & square operators only
Rectangular operators only
Max. panel thickness : 8 mm (.315)
(.629 DIA
Ø16.00
Industrial controls
PANEL CUT
Installation - tools
0.00/+0.30
.000/+.011
)
(.059)
(.629 DIA
1.50
Ø16.00
-
OUT
10.50
(.413)
(.078 DIA)
0.00/+0.30
.000/+.011
Ø2.00
)
G-15
G