A16-CTM Omron, A16-CTM Datasheet - Page 25

• Manufacturer Part Number: A16-CTM
• Description: CASE ROUND 16 SERIES MOMENTARY
• Manufacturer: Omron
• Type: Round Caser
• Series: A16r

Specifications of A16-CTM

• Switch Type: Push Button Switch
• Operating Temp Range: -10C to 55C
• Illumination: Not Illuminated
• Mounting Style: Snap On
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A16 Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: A16CTM

A16
Removing and Mounting the Pushbutton
Removing the Lamp
Removing from the Pushbutton End
Removing from the Switch End
The Lamp can be removed by hand once the Switch is removed
using the A16Z-5080 Extractor.
Installing the Lamp
When mounting the Lamp, make sure it is facing the direction shown
in the following diagram. Insert the Lamp while matching the pro-
truding part of the Lamp and the small guides on the outer surface of
the Case.
The Lamp can be mounted from the Pushbutton end by using the
A16Z-5080 Extractor. The lamp can be mounted by following the
opposite procedure for removing the Lamp.
76
1. Remove the Pushbutton as shown in the following diagram. If
2. To attach the Pushbutton, push until it clicks into place.
Mounting and Replacing the
Pushbutton
the Pushbutton cannot be removed by hand, use the
A3PJ-5080 Extractor.
Protruding part
Lamp
Grip the Lamp with the
A16Z-5080 Extractor and
pull to remove.
Pushbutton
Mounting the A16Z Dust Cover
Note: Recommended panel thickness: 0.5 to 2 mm.
Mounting the A16Z Switch Guard
Note: Recommended panel thickness: 0.5 to 2 mm.
Set
A16ZJ-5060
1. Separate the Dust Cover into 2 parts: cover A and cover B.
2. Insert the Case into cover B.
3. Mount these parts together onto the panel.
4. From the back of the panel, mount the lock ring and secure
5. Insert cover A into cover B. Ensure that the entire perimeter of
6. Mount the Switch Unit to the Case.
1. Insert the Case into the Switch Guard.
2. Mount these parts together onto the panel.
3. From the back of the panel, mount the lock ring and secure
4. Attach the Switch Unit to the Case.
with the mounting nut.
cover A is securely attached to cover B by pressing in
different directions.
with the mounting nut.
Switch Unit
Pushbutton Unit
Switch Guard
Mounting nut
Lock ring
Panel
Switch Unit
Cover A
(transparent)
Pushbutton Unit
Cover B
(black)
Panel
Lock ring
Mounting nut
A16