98130 Desco, 98130 Datasheet - Page 2

• Manufacturer Part Number: 98130
• Description: TESTER AC OUTLET & WRIST STRAP
• Manufacturer: Desco
• Type: Testerr

Specifications of 98130

• Features: Portable
• Power Supply Type: 120V AC
• Standards: ANSI⁄ESD S20.20
• Voltage, Supply: 27
• For Use With/related Products: AC Outlet and Wrist Strap
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

TB-2099 Page 2 of 3
Figure 3.
Strap Tester features and components
TESTING THE WRIST STRAP TESTER
PROCEDURE FOR ITEM
A. LOW FAIL - Connect a 450 kilohm resistor @ 5%
B. LOW PASS - Connect a 550 kilohm resistor @ 5%
C. HIGH PASS - Connect a 45 megohm resistor @ 5%
D. HIGH FAIL - Connect a 60 megohm resistor @ 5%
FRONT VIEW
98131
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Website:
220V AC Outlet Analyzer and Wrist
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will momentarily illuminate then
turn off. This test confirms the LOW FAIL
point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated until the
resistor is removed from the Test Plate.
This test confirms the LOW PASS point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated unitl the
resistor is removed from the Test Plate.
This test confirms the HIGH PASS point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED should not illuminate. This test
confirms the HIGH FAIL point.
Outlet LEDs
Test LED
Wrist Strap
Test Jack
Test Plate
Wrist Strap
98130
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
Load / Hot
Ground
Neutral
BACK VIEW
PROCEDURE FOR ITEM
A. LOW FAIL - Connect a 675 kilohm resistor @ 5%
B. LOW PASS - Connect a 825 kilohm resistor @ 5%
C. HIGH PASS - Connect a 32 megohm resistor @ 5%
D. HIGH FAIL - Connect a 40 megohm resistor @ 5%
TESTING THE AC OUTLET ANALYZER (98130 ONLY)
NOTE: The following procedure should only be done by
someone familiar with voltage hazards. This procedure
does not apply to item 98131 because the United Kingdom
does not reference GROUND to NEUTRAL as the United
States does.
Isolate the ground plug from the AC Outlet Analyzer and
Wrist Strap Tester by inserting the tester into a “3 to 2” plug
adapter.
A. PASS OUTLET - Connect a 5 kilohm resistor @ 5%
B. FAIL OUTLET - Connect a 12.5 kilohm resistor @ 5%
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will momentarily illuminate then
turn off. This test confirms the LOW FAIL
point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated until the
resistor is removed from the Test Plate.
This test confirms the LOW PASS point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED will remain illuminated unitl the
resistor is removed from the Test Plate.
This test confirms the HIGH PASS point.
tolerance between the Wrist Strap Test
Jack and the Test Plate. The Wrist Strap
Test LED should not illuminate. This test
confirms the HIGH FAIL point.
tolerance across the Neutral Plug and
Ground Plug. The Outlet PASS LED
should remain illuminated until the
resistor is removed. This test
confirms the PASS point for the
neutral-to-ground resistance.
tolerance across the Neutral Plug and
Ground Plug. The Outlet FAIL LED
should remain illuminated until the
resistor is removed. This test
confirms the FAIL point for the
neutral-to-ground resistance.
98131
Desco.com
© 2010 DESCO INDUSTRIES, INC.
Employee Owned