1115 X 1" 3M, 1115 X 1" Datasheet - Page 3

• Manufacturer Part Number: 1115 X 1"
• Description: TAPE FOIL .005" 1" X 60YDS
• Manufacturer: 3M
• Series: 1115r

Specifications of 1115 X 1"

• Featured Product: Thermal Interface Materials
• Shape: Tape
• Thickness - Overall: 0.007" (0.177mm)
• Width: 1.00" (25.40mm)
• Length: 180' (55.0m) 60 yds
• Adhesive: Acrylic, Conductive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Other names: 3M1115C

Unusual Fire and Explosion Hazards:
aluminum or zinc in a pressurized system may generate hydrogen gas which could create an explosion hazard.
Accidental Release Measures: Not applicable.
7.1 HANDLING
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under
normal use conditions. Keep away from aluminum and zinc. Do not mix with acids. Avoid contact with oxidizing agents. Do not
mix with oxidizers to avoid risk of explosion.
7.2 STORAGE
Store away from heat. Store away from acids. Store away from oxidizing agents. Store away from strong bases and amines.
8.1 ENGINEERING CONTROLS
Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Not applicable.
8.2.2 Skin Protection
Gloves are not required.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
8.2.4 Prevention of Swallowing
Not applicable.
8.3 EXPOSURE GUIDELINES
SOURCE OF EXPOSURE LIMIT DATA:
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M 1115 and 1120 Aluminum Conductive Tape
ALUMINUM FOIL
ALUMINUM FOIL
ALUMINUM FOIL
Ingredient
SECTION 6: ACCIDENTAL RELEASE MEASURES
SECTION 7: HANDLING AND STORAGE
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
Not applicable. No unusual fire or explosion hazards are anticipated. Contact with
ACGIH
OSHA
OSHA
Authority
TWA
TWA, respirable
TWA, as total dust
Type
10 mg/m3
5 mg/m3
15 mg/m3
Limit
01/19/2007
Table Z-1
Table Z-1
Additional Information
Page
3 of 6