ZMN2405HP-C RFM, ZMN2405HP-C Datasheet - Page 3

• Manufacturer Part Number: ZMN2405HP-C
• Description: MODULE ZIGBEE 2.4GHZ COORDNTR
• Manufacturer: RFM
• Series: ZMNr

Specifications of ZMN2405HP-C

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: Mesh, p2p Networks
• Power - Output: 18dBm
• Sensitivity: -95dBm
• Voltage - Supply: 3.3 V ~ 5.5 V
• Current - Receiving: 33mA
• Current - Transmitting: 130mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Interface Type: SPI, UART
• Modulation: DSSS, OQPSK
• Operating Voltage: 3.3 VDC to 5.5 VDC
• Output Power: 100 mW
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: CC2430
• Other names: 583-1016

ZMN2405HP Hardware
The major hardware component of the ZMN2405HP is
the CC2430 IEEE 802.15.4 compatible transceiver
with integrated 8051 microcontroller. The ZMN2405HP
operates in the frequency band of 2405 to 2475 MHz
at a nominal output power of 63 mW.
The ZMN2405HP includes a low noise preamplifier in
the receiver path and a power amplifier in the transmit-
ter path, greatly increasing the operating range of the
CC2430. Two crystals are provided to operate the
CC2430, a 32 MHz crystal for normal operation and a
32.768 kHz crystal for precision sleep mode operation.
The ZMN2405HP provides a variety of application
hardware interfaces including an SPI interface, UART
interface, three 12-bit ADC inputs, two PWM (DAC)
outputs, and six general purpose digital I/O ports.
ZMN2405HP Firmware
The main firmware components in the ZMN2405HP in-
clude the ZigBee protocol stack and the Cirronet Stan-
Figure 1
3
dard Module (CSM) application profile. The ZigBee
protocol stack implements networking and security,
with underlying support from the 802.15.4 Media Ac-
cess Control (MAC) layer. The standard ZMN2405HP
firmware implements a ZigBee full function device
(FFD). This allows the module to operate as either a
coordinator or router. Optional ZMN2405HP firmware
is available that implements a ZigBee reduced func-
tion device (RFD). This allows the module to operate
as an end device. The CSM profile provides an appli-
cation programming interface (API) for all the
ZMN2405HP application hardware interfaces. The
CSM profile includes Network Discovery, Send/Re-
ceive Serial Data, Read/Write SPI Port, Read ADC In-
puts, Write DAC Outputs, Read/Write GPIO and
Module Configuration services. In addition, the CSM
profile provides two sleep modes - timer sleep and in-
terrupt sleep. See the ZMN2405HP ZigBee Module
Developer’s Kit User’s Manual for complete details of
the CSM profile API.