XC09-009PKC-UA Digi International/Maxstream, XC09-009PKC-UA Datasheet - Page 8

• Manufacturer Part Number: XC09-009PKC-UA
• Description: MODEM RF 900MHZ USB 9600 W/ACC
• Manufacturer: Digi International/Maxstream
• Series: 9XCite™r

Specifications of XC09-009PKC-UA

• Frequency: 900MHz
• Data Rate - Maximum: 9.6kbps
• Modulation Or Protocol: FHSS, FSK
• Power - Output: 6dBm
• Sensitivity: -108dBm
• Voltage - Supply: 2.85 V ~ 5.5 V
• Current - Receiving: 45mA
• Current - Transmitting: 55mA
• Data Interface: Connector, USB
• Antenna Connector: RP-SMA
• Operating Temperature: 0°C ~ 70°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -

9XCite‐PKG‐U™ USB RF Modem – Product Manual v2.1 [2007.01.04]
2. RF Modem Operation
2.1. Driver Installations
2.1.1. USB Background Information
To interface through the USB port of a PC, OS-specific drivers must be installed. The PKG-U RF
Modem is a "plug-and-play" device that should automatically be detected by the PC. Once the
modem is detected, the PC will display an installation wizard that facilitates driver installations.
Drivers for Windows, Macintosh & LINUX operating systems are included on the MaxStream CD.
Two drivers, 'Hardware USB Bus' and 'Virtual Com Port', must be installed.
To Install Drivers (Using the Microsoft Windows OS):
USB has two types of devices: Those that supply drivers (a host, such as a PC); and those that
require a driver (a client, such as a MaxStream USB RF Modem). When a USB client is plugged into
a host, the host prompts for a driver. Once a driver is located, the host loads the driver on the first
use of the USB client; then reloads the installed driver on all subsequent uses.
A USB client should not be plugged into another client. If another USB client (such as a USB video
camera) is plugged into a MaxStream USB RF modem (also a client), the devices will not commu-
nicate. It would be incorrect to attach a USB modem to a host on one end and attach a USB
modem to a USB client at the other end. Virtually all USB peripherals (video cameras, PDA cradles,
printers, etc.) are USB clients.
Some client devices can act as a host. This is known as "USB on-the-go". An appropriate USB on-
the-go enabled device (such as a PDA with USB on-the-go support) may connect to and utilize a
MaxStream USB RF Modem. Contact MaxStream for information about device drivers.
The following example outlines the installation steps taken when using the Microsoft Windows
XP operating system:
1.
2.
3.
4.
5.
6.
7.
8.
© 2007 MaxStream, Inc.
Connect the XCite-PKG-U RF Modem to a PC using a USB cable.
--> ["Found New Hardware Wizard" dialog box appears.]
Verify the MaxStream CD is inserted into the drive.
Select "Install from a specific list or location (Advanced)" option;
then select the 'Next' button.
a. Select the 'Search for the best driver in these locations' option.
b. Check 'Search removable media (CD-ROM...)' box; then select the 'Next' button.
--> [Hardware Installation "Windows Logo Testing" alert box appears.]
Select the 'Continue Anyway' button.
Select the 'Finish' button.
Repeat steps 2 through 6 to install the next driver.
Reboot computer if prompted to do so.
8