AT86RF231-ZU Atmel, AT86RF231-ZU Datasheet - Page 72
![IC TXRX ZIGBE/802.15.4/ISM 32QFN](/photos/14/21/142149/mfg_at86rf231-zu_sml.jpg)
AT86RF231-ZU
Manufacturer Part Number
AT86RF231-ZU
Description
IC TXRX ZIGBE/802.15.4/ISM 32QFN
Manufacturer
Atmel
Datasheet
1.AT86RF231-ZUR.pdf
(198 pages)
Specifications of AT86RF231-ZU
Frequency
2.4GHz
Data Rate - Maximum
2Mbps
Modulation Or Protocol
802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
Applications
Industrial Monitoring and Control, Wireless Alarm and Security Systems
Power - Output
-17dBm ~ 3dBm
Sensitivity
-101dBm
Voltage - Supply
1.8 V ~ 3.6 V
Current - Receiving
12.3mA
Current - Transmitting
14mA
Data Interface
PCB, Surface Mount
Antenna Connector
PCB, Surface Mount
Operating Temperature
-40°C ~ 85°C
Package / Case
32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
Number Of Receivers
1
Number Of Transmitters
1
Wireless Frequency
2405 MHz to 2480 MHz
Interface Type
SPI
Noise Figure
6 dB
Output Power
20 dB
Operating Supply Voltage
2.5 V, 3.3 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Maximum Supply Current
12.3 mA
Minimum Operating Temperature
- 40 C
Modulation
OQPSK
Protocol Supported
802.15.4
Transmitting Current
11.6mA
Data Rate
2Mbps
Frequency Range
2.405GHz To 2.48GHz
Modulation Type
O-QPSK
Sensitivity Dbm
-101dBm
Rf Ic Case Style
QFN
No. Of Pins
32
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Memory Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT86RF231-ZU
Manufacturer:
ATMEL/爱特梅尔
Quantity:
20 000
AT86RF231
• Bit 5 - AACK_FLTR_RES_FT
This register bit shall only be set if AACK_UPLD_RES_FT = 1.
If AACK_FLTR_RES_FT = 1 reserved frame types are filtered similar to data frames as speci-
fied in IEEE 802.15.4-2006. Reserved frame types are explained in IEEE 802.15.4, section
7.2.1.1.1.
If AACK_FLTR_RES_FT = 0 the received reserved frame is only checked for a valid FCS.
• Bit 4 - AACK_UPLD_RES_FT
If AACK_UPLD_RES_FT = 1 received frames indicated as a reserved frame are further pro-
cessed. For those frames, an IRQ_3 (TRX_END) interrupt is generated if the FCS is valid.
In conjunction with the configuration bit AACK_FLTR_RES_FT set, these frames are handled
like IEEE 802.15.4 compliant data frames during RX_AACK transaction. An IRQ_5 (AMI) inter-
rupt is issued, if the addresses in the received frame match the node's addresses.
That means, if a reserved frame passes the third level filter rules, an acknowledgement frame is
generated and transmitted if it was requested by the received frame. If this is not wanted register
bit AACK_DIS_ACK (register 0x2E, CSMA_SEED_1) has to be set.
• Bit 3 - Reserved
• Bit 2 - AACK_ACK_TIME
According to IEEE 802.15.4, section 7.5.6.4.2, the transmission of an acknowledgment frame
shall commence 12 symbols (aTurnaroundTime) after the reception of the last symbol of a data
or MAC command frame. This is achieved with the reset value of the register bit
AACK_ACK_TIME.
Alternatively, if AACK_ACK_TIME = 1 an acknowledgment frame is sent already 2 symbol peri-
ods after the reception of the last symbol of a data or MAC command frame. This may be
applied to proprietary networks or networks using the High Data Rate Modes to increase battery
lifetime and to improve the overall data throughput; refer to
Section 11.3 “High Data Rate
Modes” on page
137.
This setting affects also to acknowledgment frame response time for slotted acknowledgement
operation, see
Section 7.2.3.6 “RX_AACK Slotted Operation - Slotted Acknowledgement” on
page
62.
• Bit 1 - AACK_PROM_MODE
Register bit AACK_PROM_MODE enables the promiscuous mode, within the RX_AACK mode;
refer to IEEE 802.15.4-2006, section 7.5.6.5.
If this bit is set, every incoming frame with a valid PHR finishes with IRQ_3 (TRX_END) interrupt
even if the third level filter rules do not match or the FCS is not valid. Register bit
RX_CRC_VALID (register 0x06, PHY_RSSI) is set accordingly.
Here, if a frame passes the third level filter rules, an acknowledgement frame is generated and
transmitted unless disabled by register bit AACK_DIS_ACK (register 0x2E, CSMA_SEED_1).
• Bit 0 - Reserved
72
8111C–MCU Wireless–09/09