2200-00076 Laird Technologies, 2200-00076 Datasheet - Page 19

• Manufacturer Part Number: 2200-00076
• Description: BOARD CL4424-100-232 RS232 W/DB9
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of 2200-00076

• Frequency: 2.4GHz
• Data Rate - Maximum: 288kbps
• Modulation Or Protocol: FHSS, FSK
• Applications: Wireless Modules
• Power - Output: 100mW
• Voltage - Supply: 7 V ~ 18 V
• Current - Receiving: 102mA
• Current - Transmitting: 125mA
• Data Interface: Connector, DB-9M
• Antenna Connector: RP-SMA
• Operating Temperature: -40°C ~ 80°C
• Package / Case: Module
• Technology/ Type: PC Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Sensitivity: -
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: CL4424-100-232
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

CL4424 User’s Manual
4.3
1. Connect a CL4424 unit to the serial communications port on the PC.
2. Connect the power supply to the CL4424 unit. Make sure the Pwr LED is on.
3. Start the CL4424 Configuration Utility.
4. Select the COM Port that is connected to the CL4424 unit on the PC Settings section.
5. Select the Interface Baud Rate of the CL4424 unit. All CL4424 units are shipped with a
6. Select the System Configuration for the CL4424 network, Point-to-Point (one Server and one
7. Select Read Radio to display the current settings of the CL4424 unit.
8. Change desired settings.
9. After all changes have been made, select Write Radio to save the changes.
10. Cycle Power to the unit after all changes has been saved. This will set the CL4424 unit to its
6/21/2005
default rate of 115,200 bps (unless units have been pre-configured to match specific serial
settings). If the Interface Baud Rate of the CL4424 unit is changed as described in Section
4.2 Changing CL4424 Settings, then PC Setting Baud Rate must be set to the same Baud
Rate to allow proper programming of the units.
Client) or Point-to-Multipoint (one Server and multiple Clients).
normal mode of operation.
Programming The CL4424 units
19