CB-OBS411X-04-0 ConnectBlue, CB-OBS411X-04-0 Datasheet - Page 14
![BLUETOOTH V2.1+EDR MODULE 4DBM](/photos/14/20/142087/cb-obs411x-04-0_sml.jpg)
CB-OBS411X-04-0
Manufacturer Part Number
CB-OBS411X-04-0
Description
BLUETOOTH V2.1+EDR MODULE 4DBM
Manufacturer
ConnectBlue
Specifications of CB-OBS411X-04-0
Frequency
2.4GHz
Data Rate - Maximum
115.2kbps
Modulation Or Protocol
Bluetooth v2.1+EDR, Class 2 & 3
Applications
General Purpose
Power - Output
4dBm
Sensitivity
-84dBm
Voltage - Supply
3 V ~ 6 V
Current - Receiving
15.5mA
Current - Transmitting
25.1mA
Data Interface
Solder Pads, 2 x 20mm, 1 mm pitch
Antenna Connector
U.FL
Operating Temperature
-30°C ~ 85°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Memory Size
-
Other names
809-1034
connectBlue
Copyright © 2010 connectBlue AB
The external antennas are connected to the board through a U.FL connector. Some of the antennas are connected directly to the U.FL
connector of the board and some are connected using an SMA or reversed polarity SMA connector through a short U.FL to SMA or
reversed polarity SMA adapter cable. The SMA antenna versions are not allowed for usage in USA and Canada. Instead the reversed
polarity SMA must be used. Other antennas are also available on request (please contact connectBlue for more information).
5.2 Antenna Connector (External antennas)
Part Number cB-ACC-18 / cB-ACC-48
Name
Connector
Cable length
Cable loss
Comment
Part
Number
Name
Connector
Cable length
Cable loss
Comment
5.2.1 Antenna Accessories
cB-ACC-38
U.FL to reverse polarity SMA adapter cable
U.FL and reverse polarity SMA jack (outer thread and pin)
120 mm
Less than 0.5dB
The reverse polarity SMA connector may be mounted in a
panel.
Approved for use in the US, Canada and Europe.
U.FL to SMA adapter cable
U.FL and SMA jack (outer thread and pin receptacle)
120 mm
Less than 0.5dB
The SMA connector may be mounted in a panel.
Not approved for use in the US and Canada.
Approved for EU.
Page 14 of 42