20-101-1265 Rabbit Semiconductor, 20-101-1265 Datasheet - Page 122

• Manufacturer Part Number: 20-101-1265
• Description: MODULE MINICORE RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r

Specifications of 20-101-1265

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.11 b/g
• Applications: General Purpose
• Voltage - Supply: 3.15 V ~ 3.45 V
• Current - Receiving: 625mA
• Current - Transmitting: 625mA
• Data Interface: Connector, Mini PCI express
• Memory Size: 1 MB Flash, 1MB SRAM
• Antenna Connector: U.FL
• Operating Temperature: -30°C ~ 55°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Security: 64/128 bit WEP
• Operating Voltage: 3.3 V
• Antenna: U.FL Connector
• Operating Temperature Range: - 30 C to + 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power - Output: -
• Sensitivity: -
• Data Rate - Maximum: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Rabbit 5000
• Other names: 316-1174

E.3.2 Add Additional Boards
The Prototyping Board and the two accessory boards included with the Deluxe Develop-
ment Kit may be installed on the Interface Board as shown in Figure E-6.
1. Insert the header strip into header socket J2 on the Interface Board or the board already
2. Line up the board being installed above the pins extending from the header socket and
3. Press down to install the board.
4. Insert additional plastic standoffs/connectors as shown to hold the board firmly in place
When additional boards are installed, the board-to-board spacing is 0.7" (17.8 mm).
Multiple boards should be installed in this sequence from bottom to top.
• Interface Board with RCM5600W installed.
• Prototyping Board.
• Serial Communication accessory board.
• Digital I/O accessory board.
116
installed above the Interface Board.
the stand-offs/connectors.
and to hold another board if desired—note that one plastic standoff/connector needs to
be inserted “upside down” to secure the Prototyping Board or other accessory board
above the antenna bracket.
Figure E-6. Install Additional Boards
MiniCore RCM5600W