RN-42 Roving Networks Inc, RN-42 Datasheet - Page 9

• Manufacturer Part Number: RN-42
• Description: MODULE BLUETOOTH V2.1+EDR
• Manufacturer: Roving Networks Inc
• Series: RNr

Specifications of RN-42

• Frequency: 2.4GHz
• Data Rate - Maximum: 3Mbps
• Modulation Or Protocol: Bluetooth v2.1+EDR, Class 2 & 3
• Applications: General Purpose
• Power - Output: 2dBm
• Sensitivity: -80dBm
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Receiving: 25mA
• Current - Transmitting: 25mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Packaged Unit
• Wireless Frequency: 2.4 GHz
• Data Rate: 1200 bps to 921 Kbps
• Modulation: FHSS, GFSK
• Operating Voltage: 3.3 V
• Antenna: Chip
• Operating Temperature Range: - 40 C to + 85 C
• Output Power: 2 dBm
• Technology/ Type: Class 2 Bluetooth Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 740-1038

www.rovingnetworks.com
SE,<1,0>
SF,1
SI, <hex word> -
SJ, <hex word>
SL,<E,O,N>
SM,<5,4,3,2,1,0>
SN,<name>
S-,<name>
SO,<text>
809 University Avenue
SC,001F
SD,0123
Inquiry Scan Window. Sets amount of time device spends enabling inquiry scan
(discoverability). Minimum value is 0x0012, corresponding to about 1% duty cycle.
Inquiry interval is fixed at 0x800, so time spent in inquiry is 0x12/0x100 by default.
Maximum value is 0x800, set to 0x0000 to disable inquiry scan and make device non-
discoverable. Default value is 0x0200.
Page Scan Window. Sets amount of time device spends enabling page scan
Encryption 1 to enable, 0 to disable.
Set Factory Defaults.
(connectability) . Minimum value is 0x0012, corresponding to about 1% duty cycle.
Page Scan interval is fixed at 0x800, so time spent in page scan mode is 0x12/0x800
by default. Maximum value is 0x800, set to 0x0000 to disable page scan and make
device non-connectable. Default value is 0x0200.
Set UART parity.
needed and must be capital.
Example : “SL,E”
Mode (0=slave, 1=master,2=trigger, 3=auto, 4=DTR, 5=ANY)
Example : “SM,1”
Name of the device, 20 characters maximum.
Example: “SN,MyDevice”
Serialized Friendly Name of the device, 15 characters maximum.
This command will automatically append the last 2 bytes of the BT MAC address to
the name. Useful for generating a custom name with unique numbering.
Example: S-,MyDevice
Extended Status String, 8 character maximum. Setting this string to from 1 to 8
characters will enable status messages to be sent to the local serial port. Two status
messages are sent, when a Bluetooth connection is established, the string
”<text>CONNECT” will be sent. Upon a Disconnect, the string
<text>DISCONNECT will be sent. This parameter is useful, for example, when
connected to a printer, the printer can examine an escape sequence, if the <text> is
set to ESC%, the printer can parse the ESC%CONNECT and ESC%DISCONNECT
messages without interfering with normal print jobs. In Trigger or Master modes, the
first character of this string is used as the BREAK connection character.
Example: SO,ESC%
•
Los Gatos, CA 95032
Can be any of, Even, Odd, or None. Only the first character is
~ 9 ~
•
Tel [phone]
will set the name to “MyDevice-ABCD”
rn-bluetooth-um Version 4.77 1/24/2011
sets the mode to Master
sets the parity to Even.
Advanced User Manual
• [e-mail]