SI4703-B16-GM Silicon Laboratories Inc, SI4703-B16-GM Datasheet - Page 29
![IC FM RADIO TUNER 20QFN](/photos/16/15/161553/si4702-03-c19_sml.jpg)
SI4703-B16-GM
Manufacturer Part Number
SI4703-B16-GM
Description
IC FM RADIO TUNER 20QFN
Manufacturer
Silicon Laboratories Inc
Specifications of SI4703-B16-GM
Frequency
76MHz ~ 108MHz
Sensitivity
-99dBm
Modulation Or Protocol
FM
Applications
Cellular, MP3, PDAs, Portable Radios
Current - Receiving
18mA
Data Interface
PCB, Surface Mount
Antenna Connector
PCB, Surface Mount
Voltage - Supply
2.7 V ~ 5.5 V
Operating Temperature
-20°C ~ 85°C
Package / Case
20-QFN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Memory Size
-
Data Rate - Maximum
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
336-1334-1
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SI4703-B16-GMR
Manufacturer:
SILICON LABS/芯科
Quantity:
20 000
Register 07h. Test 1
Reset value = 0x0100
Name XOSCEN AHIZEN
Type
13:0
Bit
Bit
15
14
R/W
D15
XOSCEN
Reserved
AHIZEN
Name
D14
R/W
Crystal Oscillator Enable.
0 = Disable (default).
1 = Enable.
The internal crystal oscillator requires an external 32.768 kHz crystal as shown in
2. "Typical Application Schematic" on page 13. The oscillator must be enabled before
powerup (ENABLE = 1) as shown in Figure 9, “Initialization Sequence,” on page 20. It
should only be disabled after powerdown (ENABLE = 0). Bits 13:0 of register 07h
must be preserved as 0x0100 while in powerdown and as 0x3C04 while in powerup.
Refer to Si4702/03 Internal Crystal Oscillator Errata.
Audio High-Z Enable.
0 = Disable (default).
1 = Enable.
Setting AHIZEN maintains a dc bias of 0.5 x V
vent the ESD diodes from clamping to the V
swing of another device. Register 07h containing the AHIZEN bit must not be written
during the powerup sequence and high-Z only takes effect when in powerdown and
V
erdown and as 0x3C04 while in powerup.
Reserved.
If written, these bits should be read first and then written with their pre-existing val-
ues. Do not write during powerup.
IO
D13
is supplied. Bits 13:0 of register 07h must be preserved as 0x0100 while in pow-
D12
D11 D10
Confidential Rev. 1.1
D9
D8
Function
Reserved
D7
R/W
IO
IO
or GND rail in response to the output
D6
on the LOUT and ROUT pins to pre-
D5
D4
Si4703-B16
D3
D2
D1
D0
29